Hi, Have you changed the SW7 to boot from UART? Plus you should be getting a BOOTME pattern.
In the version that I used sometime back, you should also have the files names as explained in the wiki page! Cheers, Deepak Shankar V -----Original Message----- From: davinci-linux-open-source-bounces+deepaks=hcl...@linux.davincidsp.com [mailto:davinci-linux-open-source-bounces+deepaks=hcl...@linux.davincidsp.com] On Behalf Of Tharmarajan G Sent: Monday, July 27, 2009 12:43 PM To: [email protected] Subject: DM355 - NAND Flash Programming using UART Hi, I am working on DM355 EVM Board. I want to update the bootloader image to the NAND flash memory of the DM355 EVM Board using the UART Interface. I have gone through the details given in the following link: http://wiki.davincidsp.com/index.php/Serial_Boot_and_Flash_Loading_Utility But I am not able to update the bootloader to the NAND flash memory. Please help me to solve this issue. Log Message ########### [r...@tharma GNU]# mono ./sfh_DM35x.exe -nandflash -v -p /dev/ttyS0 ubl/ubl_DM35x_nand.bin /home/tharma/project/ip_net_cam/dvsdk_1_30_00_40/PSP_01_20_00_014/bin/dm355/u-boot-1.2.0-dm355_evm.bin ----------------------------------------------------- TI Serial Flasher Host Program for DM35x (C) 2009, Texas Instruments, Inc. Ver. 1.50 ----------------------------------------------------- Flashing NAND with ubl/ubl_DM35x_nand.bin and /home/tharma/project/ip_net_cam/dvsdk_1_30_00_40/PSP_01_20_00_014/bin/dm355/u-boot-1.2.0-dm355_evm.bin. Attempting to connect to device /dev/ttyS0... set_signal [r...@tharma GNU]# Regards, Tharmarajan G _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source DISCLAIMER: ----------------------------------------------------------------------------------------------------------------------- The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. It shall not attach any liability on the originator or HCL or its affiliates. Any views or opinions presented in this email are solely those of the author and may not necessarily reflect the opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of the author of this e-mail is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any mail and attachments please check them for viruses and defect. ----------------------------------------------------------------------------------------------------------------------- _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
