What is your mono version ?
It won't work with mono version < 2.0
Tharmarajan G a écrit :
Hi Shankar,
Yes. I have already changed the SW7 to boot from UART and got the
continuous 'BOOTME' message on the Serial port ( by using the minicom
command). But the NAND programming through serial port is not happening.
Note:
Before running the application sfh_DM35x.exe , I have stopped minicom
utility.
Regards,
Tharmarajan G
On Mon, 2009-07-27 at 12:50 +0530, Deepak Shankar-TLS,Chennai. wrote:
Hi,
Have you changed the SW7 to boot from UART?
Plus you should be getting a BOOTME pattern.
In the version that I used sometime back, you should also have the files names
as explained in the wiki page!
Cheers,
Deepak Shankar V
-----Original Message-----
From: davinci-linux-open-source-bounces+deepaks=hcl...@linux.davincidsp.com
[mailto:davinci-linux-open-source-bounces+deepaks=hcl...@linux.davincidsp.com]
On Behalf Of Tharmarajan G
Sent: Monday, July 27, 2009 12:43 PM
To: [email protected]
Subject: DM355 - NAND Flash Programming using UART
Hi,
I am working on DM355 EVM Board. I want to update the bootloader image
to the NAND flash memory of the DM355 EVM Board using the UART Interface.
I have gone through the details given in the following link:
http://wiki.davincidsp.com/index.php/Serial_Boot_and_Flash_Loading_Utility
But I am not able to update the bootloader to the NAND flash memory.
Please help me to solve this issue.
Log Message
###########
[r...@tharma GNU]# mono ./sfh_DM35x.exe -nandflash -v -p /dev/ttyS0
ubl/ubl_DM35x_nand.bin
/home/tharma/project/ip_net_cam/dvsdk_1_30_00_40/PSP_01_20_00_014/bin/dm355/u-boot-1.2.0-dm355_evm.bin
-----------------------------------------------------
TI Serial Flasher Host Program for DM35x
(C) 2009, Texas Instruments, Inc.
Ver. 1.50
-----------------------------------------------------
Flashing NAND with ubl/ubl_DM35x_nand.bin and
/home/tharma/project/ip_net_cam/dvsdk_1_30_00_40/PSP_01_20_00_014/bin/dm355/u-boot-1.2.0-dm355_evm.bin.
Attempting to connect to device /dev/ttyS0...
set_signal
[r...@tharma GNU]#
Regards,
Tharmarajan G
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
DISCLAIMER:
-----------------------------------------------------------------------------------------------------------------------
The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only.
It shall not attach any liability on the originator or HCL or its affiliates. Any views or opinions presented in
this email are solely those of the author and may not necessarily reflect the opinions of HCL or its affiliates.
Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of
this message without the prior written consent of the author of this e-mail is strictly prohibited. If you have
received this email in error please delete it and notify the sender immediately. Before opening any mail and
attachments please check them for viruses and defect.
-----------------------------------------------------------------------------------------------------------------------
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
