Hi, Have you changed the transfer settings in minicom or so. Say When you do a Ctrl-AZ S you send a file in yModem by default. Have you changed any settings!
I have tried it with the hyper terminal(Windows) and it is working. I dont think minicom would make any difference. When you say the programming is not happening, is the file transfer getting terminated? Cheers, Deepak Shankar V -----Original Message----- From: Tharmarajan G [mailto:[email protected]] Sent: Monday, July 27, 2009 1:03 PM To: Deepak Shankar-TLS,Chennai. Cc: [email protected] Subject: RE: DM355 - NAND Flash Programming using UART Hi Shankar, Yes. I have already changed the SW7 to boot from UART and got the continuous 'BOOTME' message on the Serial port ( by using the minicom command). But the NAND programming through serial port is not happening. Note: Before running the application sfh_DM35x.exe , I have stopped minicom utility. Regards, Tharmarajan G On Mon, 2009-07-27 at 12:50 +0530, Deepak Shankar-TLS,Chennai. wrote: > Hi, > > Have you changed the SW7 to boot from UART? > Plus you should be getting a BOOTME pattern. > > In the version that I used sometime back, you should also have the files > names as explained in the wiki page! > > > Cheers, > Deepak Shankar V > -----Original Message----- > From: > davinci-linux-open-source-bounces+deepaks=hcl...@linux.davincidsp.com > [mailto:[email protected] > dsp.com] On Behalf Of Tharmarajan G > Sent: Monday, July 27, 2009 12:43 PM > To: [email protected] > Subject: DM355 - NAND Flash Programming using UART > > Hi, > > I am working on DM355 EVM Board. I want to update the bootloader image > to the NAND flash memory of the DM355 EVM Board using the UART Interface. > > I have gone through the details given in the following link: > http://wiki.davincidsp.com/index.php/Serial_Boot_and_Flash_Loading_Uti > lity > > But I am not able to update the bootloader to the NAND flash memory. > > Please help me to solve this issue. > > Log Message > ########### > [r...@tharma GNU]# mono ./sfh_DM35x.exe -nandflash -v -p /dev/ttyS0 > ubl/ubl_DM35x_nand.bin > /home/tharma/project/ip_net_cam/dvsdk_1_30_00_40/PSP_01_20_00_014/bin/ > dm355/u-boot-1.2.0-dm355_evm.bin > > > > > > ----------------------------------------------------- > TI Serial Flasher Host Program for DM35x > (C) 2009, Texas Instruments, Inc. > Ver. 1.50 > ----------------------------------------------------- > > > Flashing NAND with ubl/ubl_DM35x_nand.bin and > /home/tharma/project/ip_net_cam/dvsdk_1_30_00_40/PSP_01_20_00_014/bin/dm355/u-boot-1.2.0-dm355_evm.bin. > > > Attempting to connect to device /dev/ttyS0... > set_signal > [r...@tharma GNU]# > > > Regards, > Tharmarajan G > > > > _______________________________________________ > Davinci-linux-open-source mailing list > [email protected] > http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source > > DISCLAIMER: > ---------------------------------------------------------------------- > ------------------------------------------------- > > The contents of this e-mail and any attachment(s) are confidential and > intended for the named recipient(s) only. > It shall not attach any liability on the originator or HCL or its > affiliates. Any views or opinions presented in this email are solely those of > the author and may not necessarily reflect the opinions of HCL or its > affiliates. > Any form of reproduction, dissemination, copying, disclosure, > modification, distribution and / or publication of this message > without the prior written consent of the author of this e-mail is > strictly prohibited. If you have received this email in error please delete > it and notify the sender immediately. Before opening any mail and attachments > please check them for viruses and defect. > > ---------------------------------------------------------------------- > ------------------------------------------------- > _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
