From: Thomas Koeller <[email protected]> The register base address for the second serial port (UART1) was wrong.
Signed-off-by: Thomas Koeller <[email protected]> --- arch/arm/mach-davinci/dm365.c | 6 ++++++ 1 files changed, 6 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index a146849..cf08950 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -41,6 +41,9 @@ #define DM365_REF_FREQ 24000000 /* 24 MHz on the DM365 EVM */ +#undef DAVINCI_UART1_BASE /* Value in serial.h is wrong for DM365 */ +#define DAVINCI_UART1_BASE (IO_PHYS + 0x106000) + static struct pll_data pll1_data = { .num = 1, .phys_base = DAVINCI_PLL1_BASE, @@ -1020,6 +1023,9 @@ static struct davinci_timer_info dm365_timer_info = { .clocksource_id = T0_TOP, }; +#undef DAVINCI_UART1_BASE /* Value in serial.h is wrong for DM365 */ +#define DAVINCI_UART1_BASE (IO_PHYS + 0x106000) + static struct plat_serial8250_port dm365_serial_platform_data[] = { { .mapbase = DAVINCI_UART0_BASE, -- 1.7.1 _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
