ti 23. huhtik. 2019 klo 1.37 Matti Viljanen (matti.vilja...@kapsi.fi) kirjoitti: > I have a Fujitsu Q703 aka. QNap TS-221, with 1GB of RAM and 6282 variant > chip inside, and I have hit this behavior. ... > it get an IP address but the LEDs blink normally - I think this is the > same situation Timo had. I have used the recovery image QNap provided > and re-flashed the kernel by flash-debian script (and manually cat-ing, > too), but soon I should have my TTL serial adaptor ready.
Thanks a lot for testing, and confirming something goes wrong with CONFIG_VMSPLIT_3G. > I would like to help testing, if you have any ideas. What should I try next? Alas I'm out of my depth on the topic regarding what to try next if wanting to use the whole 1GB of RAM. The workaround limiting RAM to 768MB works fine, and since no variant seems to have over 1GB RAM, maybe it's acceptable tradeoff for most so this hasn't seen more progress. The workaround in u-boot with the adapter is described at https://lists.debian.org/debian-arm/2018/06/msg00000.html , and after setting that I've used my TS-221 for the past year. It can also be set via fw_printenv and fw_setenv (not tested myself) as instructed at http://karuppuswamy.com/wordpress/2012/04/16/u-boot-tools-for-debian-arm-linux-in-qnap-server/. fw_printenv gives me the following on the last line: bootargs=console=ttyS0,115200 root=/dev/ram initrd=0xa00000,0x900000 ramdisk=34816 mem=768M -Timo