SOLVED This problem seems to be with usbcore or xhci modules.
The porwer/control is "auto" by default. I change this configuration to 'on' only on USB3 port doing: echo 'on' | sudo tee /sys/bus/usb/devices/usb1/power/control and no more problem. To keep this change reboot persistent I needed to change laptop-mode configuration. I update AUTOSUSPEND_TIMEOUT in '/etc/laptop-mode/conf.d/runtime-pm.conf' to: AUTOSUSPEND_TIMEOUT=-1 But, all my USB port has this configuration updates (I'd only USB3 port because USB2 was working normally). This is the solution that I found. Best regards Mario On 18/10/16 11:45, Mario Jose Marques wrote: > To complement my problem, I boot Debian Live on USB2 (on USB3 port do > not stated) and I do not have problem to plug, unplug and plug again > devices on USB3. I read/write memory stick on USB3 without problem. > Using Windows installation, I do not have problem to copy file from > external hd on USB3 port. Then, I think it is not a hardware problem. > > It was working on my new installation, but stopped to work. > > I tried put "usbcore.autosuspend=-1" and "acpi=force irqpoll" on GRUB > like this link: > > http://askubuntu.com/questions/526082/2-usb-ports-stopped-working > > but not work too. > > Best regards! > > Mario > > > On 17/10/16 11:57, Mario Jose Marques wrote: >> Hi all! >> >> I was using Debian Wheezy until a month ago. I just installed new >> release Jessie (new install) and I'm with problem with USB3 port. >> >> I have a laptop Dell Vostro V131 with 1 port USB2 and 2 port USB3. When >> I connect any device on USB3 port (storage or mouse, for instance), it >> works only one time. If I disconnect and connect again, it does not work >> more until I restart the system. But USB2 port works without problem (I >> can plug and unplug device many time I want and the system recognize it). >> >> At first time I connect memory stick, for instance, I can fount it in >> /dev. But if I disconnect and connect again, is not shown in /dev. >> >> Follow is my configuration and what happens when I connect and >> disconnect device from USB3 port: >> >> uname -a >> Linux 7zero 3.16.0-4-amd64 #1 SMP Debian 3.16.36-1+deb8u1 (2016-09-03) >> x86_64 GNU/Linux >> >> lspci >> 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor >> Family DRAM Controller (rev 09) >> 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core >> Processor Family Integrated Graphics Controller (rev 09) >> 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series >> Chipset Family MEI Controller #1 (rev 04) >> 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset >> Family USB Enhanced Host Controller #2 (rev 05) >> 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset >> Family High Definition Audio Controller (rev 05) >> 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset >> Family PCI Express Root Port 1 (rev b5) >> 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset >> Family PCI Express Root Port 2 (rev b5) >> 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset >> Family PCI Express Root Port 4 (rev b5) >> 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset >> Family PCI Express Root Port 5 (rev b5) >> 00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset >> Family PCI Express Root Port 8 (rev b5) >> 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset >> Family USB Enhanced Host Controller #1 (rev 05) >> 00:1f.0 ISA bridge: Intel Corporation HM67 Express Chipset Family LPC >> Controller (rev 05) >> 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset >> Family 6 port SATA AHCI Controller (rev 05) >> 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family >> SMBus Controller (rev 05) >> 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. >> RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06) >> 09:00.0 Network controller: Intel Corporation Centrino Wireless-N 1030 >> [Rainbow Peak] (rev 34) >> 0b:00.0 USB controller: Texas Instruments TUSB73x0 SuperSpeed USB 3.0 >> xHCI Host Controller (rev 02) >> >> dmesg | grep usb >> [ 1.284604] usbcore: registered new interface driver usbfs >> [ 1.284617] usbcore: registered new interface driver hub >> [ 1.286770] usbcore: registered new device driver usb >> [ 1.308559] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 >> [ 1.308562] usb usb1: New USB device strings: Mfr=3, Product=2, >> SerialNumber=1 >> [ 1.308564] usb usb1: Product: xHCI Host Controller >> [ 1.308566] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd >> [ 1.308569] usb usb1: SerialNumber: 0000:0b:00.0 >> [ 1.309244] usb usb2: We don't know the algorithms for LPM for this >> host, disabling LPM. >> [ 1.309274] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 >> [ 1.309277] usb usb2: New USB device strings: Mfr=3, Product=2, >> SerialNumber=1 >> [ 1.309279] usb usb2: Product: xHCI Host Controller >> [ 1.309281] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd >> [ 1.309283] usb usb2: SerialNumber: 0000:0b:00.0 >> [ 1.435312] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 >> [ 1.435316] usb usb3: New USB device strings: Mfr=3, Product=2, >> SerialNumber=1 >> [ 1.435318] usb usb3: Product: EHCI Host Controller >> [ 1.435320] usb usb3: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd >> [ 1.435322] usb usb3: SerialNumber: 0000:00:1a.0 >> [ 1.451092] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 >> [ 1.451095] usb usb4: New USB device strings: Mfr=3, Product=2, >> SerialNumber=1 >> [ 1.451097] usb usb4: Product: EHCI Host Controller >> [ 1.451099] usb usb4: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd >> [ 1.451100] usb usb4: SerialNumber: 0000:00:1d.0 >> [ 1.867462] usb 4-1: new high-speed USB device number 2 using ehci-pci >> [ 2.000309] usb 4-1: New USB device found, idVendor=8087, idProduct=0024 >> [ 2.000313] usb 4-1: New USB device strings: Mfr=0, Product=0, >> SerialNumber=0 >> [ 2.111612] usb 3-1: new high-speed USB device number 2 using ehci-pci >> [ 2.244191] usb 3-1: New USB device found, idVendor=8087, idProduct=0024 >> [ 2.244195] usb 3-1: New USB device strings: Mfr=0, Product=0, >> SerialNumber=0 >> [ 2.315892] usb 4-1.2: new full-speed USB device number 3 using ehci-pci >> [ 2.411922] usb 4-1.2: New USB device found, idVendor=046d, >> idProduct=c52f >> [ 2.411927] usb 4-1.2: New USB device strings: Mfr=1, Product=2, >> SerialNumber=0 >> [ 2.411930] usb 4-1.2: Product: USB Receiver >> [ 2.411932] usb 4-1.2: Manufacturer: Logitech >> [ 2.438921] usbcore: registered new interface driver usbhid >> [ 2.438922] usbhid: USB HID core driver >> [ 2.446339] input: Logitech USB Receiver as >> /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2:1.0/0003:046D:C52F.0001/input/input13 >> [ 2.446943] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID >> v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input0 >> [ 2.447851] input: Logitech USB Receiver as >> /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2:1.1/0003:046D:C52F.0002/input/input14 >> [ 2.451468] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: >> USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input1 >> [ 2.483913] usb 4-1.3: new full-speed USB device number 4 using ehci-pci >> [ 2.580912] usb 4-1.3: New USB device found, idVendor=138a, >> idProduct=0011 >> [ 2.580915] usb 4-1.3: New USB device strings: Mfr=0, Product=0, >> SerialNumber=1 >> [ 2.580917] usb 4-1.3: SerialNumber: a1243e1563e0 >> [ 2.652062] usb 3-1.4: new full-speed USB device number 3 using ehci-pci >> [ 2.748562] usb 3-1.4: New USB device found, idVendor=8086, >> idProduct=0189 >> [ 2.748567] usb 3-1.4: New USB device strings: Mfr=0, Product=0, >> SerialNumber=0 >> [ 2.820203] usb 3-1.5: new high-speed USB device number 4 using ehci-pci >> [ 2.887572] usbcore: registered new interface driver btusb >> [ 2.967515] usb 3-1.5: New USB device found, idVendor=0c45, >> idProduct=6483 >> [ 2.967527] usb 3-1.5: New USB device strings: Mfr=2, Product=1, >> SerialNumber=0 >> [ 2.967533] usb 3-1.5: Product: Laptop_Integrated_Webcam_HD >> [ 2.967538] usb 3-1.5: Manufacturer: CNFA151H491030004Q52 >> [ 3.253647] input: Laptop_Integrated_Webcam_HD as >> /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.5/3-1.5:1.0/input/input16 >> [ 3.253780] usbcore: registered new interface driver uvcvideo >> >> When I connect a memory stick I have (only new output of dmesg): >> >> dmesg >> [ 1543.233770] scsi 6:0:0:0: Direct-Access SanDisk Cruzer Blade >> 1.20 PQ: 0 ANSI: 5 >> [ 1543.234593] sd 6:0:0:0: Attached scsi generic sg1 type 0 >> [ 1543.236394] sd 6:0:0:0: [sdb] 31266816 512-byte logical blocks: (16.0 >> GB/14.9 GiB) >> [ 1543.238095] sd 6:0:0:0: [sdb] Write Protect is off >> [ 1543.238110] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00 >> [ 1543.238454] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: >> enabled, doesn't support DPO or FUA >> [ 1543.247090] sdb: sdb1 >> [ 1543.249617] sd 6:0:0:0: [sdb] Attached SCSI removable disk >> >> lsblk >> NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT >> sda 8:0 0 232.9G 0 disk >> ├─sda1 8:1 0 41.9G 0 part / >> ├─sda2 8:2 0 183.6G 0 part /home >> └─sda3 8:3 0 7.4G 0 part [SWAP] >> sdb 8:16 1 14.9G 0 disk >> └─sdb1 8:17 1 14.9G 0 part >> >> When I disconnect: >> >> dmesg >> [ 1689.685414] usb 1-1: USB disconnect, device number 2 >> >> And when I reconnect, not happens until I restart laptop! >> >> Anyone had this problem or can help me? >> >> All the best, >> >> Mario >> >