Title: Header Help

Scott,
        We are running the 1.67beta version (due to needing the ROUTETO capabilities for store/forward domains).  We use the ROUTETO command in our junkmail file on the WEIGHT20 test.  In the header, prior to 1.67beta, we use to see a line in the header that stated it failed the WEIGHT20 test with X amount of weight.  Although, it still gets routed properly to an account on their Exchange Server (outside domain), when I view the header, only the WEIGHT10 shows failed in the header, not the WEIGHT20.  Although, it would have had to fail since it was routed, and the line on the WEIGHT10 is well above 20.  Another strange occurrence, is prior to the upgrade, in our postmaster.eml file for Declude Virus we had notifications going to two different recipients (prior both domains were virtual to our box).  These two different domains are now setup as store/forward domains, however, they are both handled by the same Exchange Server (outside), thus two entries are listed in our host file.  With this in mind, only the second recipient gets the notification not the other.   I wanted to see if you had seen this or could offer some advise.  Thank you for your time.

_______________________

Keith Johnson, MCP
Network Engineer
Network Advocates, Inc.
Tel:       502.412.1050
Fax:      502.412.1058
Email:  [EMAIL PROTECTED]

"Good pings come in small packets"


Reply via email to