Kevin,

Just to be more specific, if you use the HOLD action, those messages that are held will not be virus scanned.

On our system, we use a combination of COPYFILE and ROUTETO, and they are in fact virus scanned when using AVAFTERJM.

Matt



Kevin Bilbee wrote:
Be careful with this setting. If a message gets held as spam it will not be
virus scanned. Make sure you scan any message moved back into the delivery
queue for viruses before placing it in the delivery queue folder.



Kevin Bilbee

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
Darin Cox
Sent: Friday, June 13, 2008 6:10 AM
To: declude.virus@declude.com
Subject: Re: [Declude.Virus] F-PROT 6 vs ClamAV SOSDG

AVAFTERJM has been around a long time.  I don't remember what version,
but
it was a 1.x version.

Are you familiar with the setting?  It tells Declude to run Anti-Virus
after
Junkmail.  It then only runs AV after checking to see if the message is
spam.  With the spam load these days, I would expect that to be the
desired
config, resulting in AV scanning on only about 10% of incoming mail
instead
of 100%.  However, it is not the default setting, which runs AV first,
then
Junkmail.

That could easily account for yours and Kathy's 70-100% CPU.

Darin.


----- Original Message -----
From: "Brian Lin" <[EMAIL PROTECTED]>
To: <declude.virus@declude.com>
Sent: Friday, June 13, 2008 8:55 AM
Subject: Re: [Declude.Virus] F-PROT 6 vs ClamAV SOSDG


No, I am still using antique version declude and
imail.

----- Original Message -----
From: "Darin Cox" <[EMAIL PROTECTED]>
To: <declude.virus@declude.com>
Sent: Friday, June 13, 2008 8:07 PM
Subject: Re: [Declude.Virus] F-PROT 6 vs ClamAV SOSDG


Interesting that you are also seeing the 70-100% CPU with F-Prot 6,
where
we
are not.

Are you running AVAFTERJM?

Darin.


----- Original Message -----
From: "Brian Lin" <[EMAIL PROTECTED]>
To: <declude.virus@declude.com>
Sent: Friday, June 13, 2008 5:23 AM
Subject: Re: [Declude.Virus] F-PROT 6 vs ClamAV SOSDG


I just terminate my F-Prot 6, and installed ClamAV SOSDG

Before that, my CPU usage is always run to skyhigh,
at around 70%-100%,   now using ClamAV, reduce
to 5%-20%, still catching all the testing virus.

F-prot 6 do not provide option like noboot, nomem,
I guess these become the default setting, and cause
very high CPU and harddisk usage.

Alex instruction dated at 6 June 2008 for ClamAV installation
is very helpful, thanks!
The main tricks in clamav are:
1: need to install the contributors' tools, then get
two dedicated tools for declude, can run the
clamdscan as service.

2: need to remove --mbox, if this is there, it will
not function.

Brian

----- Original Message -----
From: "Brian Lin" <[EMAIL PROTECTED]>
To: <declude.virus@declude.com>
Sent: Friday, June 13, 2008 10:02 AM
Subject: Re: [Declude.Virus] F-PROT 6


I think VIRUSCODE 1 need to be added too?
http://www.f-prot.com/support/windows/fpwin_faq/310.html

Anyway, using F-Prot 6 seems very slow compare with previous F-Prot
3,
I do not know the exact reason. I have try to reduce scanlevel,
heulevel,
archive to 0 or 1, still very slow, I guess it is now scanning
memory by
default?

Another question is , for REPORT=report.txt
do we need < >?  REPORT=<report.txt>

from instruction here, looks like need < >
http://www.f-prot.com/support/windows/fpwin_faq/445.html

but most users online post seems < > is not necessary.



----- Original Message -----
From: "Darin Cox" <[EMAIL PROTECTED]>
To: <declude.virus@declude.com>
Sent: Wednesday, June 04, 2008 2:34 AM
Subject: Re: [Declude.Virus] F-PROT 6


Assuming the default location for program installation, here you
go.
SCANFILE C:\PROGRA~1\FRISKS~1\F-PROT~1\fpscan.exe /VERBOSE=0
/ARCHIVE=5
/scanlevel=4 /heurlevel=3 /REPORT=report.txt

/VERBOSE=0 corresponds to the old /SILENT switch
/TYPE is assumed now
/ARCHIVE has changed to /ARCHIVE=5
/NOMEM, /NOBOOT, /DUMB, /AI, and /SERVER are defunct
/SCANLEVEL and /HEURLEVEL are new switches.  The values above are
recommended

See the FProt 6 manual for more info on conversion of switches, and
desired
settings

Also, while the old

VIRUSCODE 3
VIRUSCODE 6
VIRUSCODE 8

is most likely sufficient, we added

VIRUSCODE 3
VIRUSCODE 5
VIRUSCODE 6
VIRUSCODE 7
VIRUSCODE 8
VIRUSCODE 9
VIRUSCODE 10
VIRUSCODE 11
VIRUSCODE 13
VIRUSCODE 14
VIRUSCODE 15
VIRUSCODE 17
VIRUSCODE 18
VIRUSCODE 19
VIRUSCODE 21
VIRUSCODE 22
VIRUSCODE 23
VIRUSCODE 25
VIRUSCODE 26
VIRUSCODE 27
VIRUSCODE 29
VIRUSCODE 30
VIRUSCODE 31
VIRUSCODE 33
VIRUSCODE 34
VIRUSCODE 35
VIRUSCODE 37
VIRUSCODE 38
VIRUSCODE 39
VIRUSCODE 41
VIRUSCODE 42
VIRUSCODE 43
VIRUSCODE 45
VIRUSCODE 46
VIRUSCODE 47
VIRUSCODE 49
VIRUSCODE 50
VIRUSCODE 51
VIRUSCODE 53
VIRUSCODE 54
VIRUSCODE 55
VIRUSCODE 57
VIRUSCODE 58
VIRUSCODE 59
VIRUSCODE 61
VIRUSCODE 62
VIRUSCODE 63

for completeness.

Hope this helps,

Darin.


----- Original Message -----
From: "David Barker" <[EMAIL PROTECTED]>
To: <declude.virus@declude.com>
Sent: Tuesday, June 03, 2008 11:46 AM
Subject: [Declude.Virus] F-PROT 6


Can anyone provide a SCANFILE line that they know works with F-PROT
6 ?
Thanks
David B







---
This E-mail came from the Declude.Virus mailing list.  To
unsubscribe, just send an E-mail to [EMAIL PROTECTED], and
type "unsubscribe Declude.Virus".    The archives can be found
at http://www.mail-archive.com.




---
This E-mail came from the Declude.Virus mailing list.  To
unsubscribe, just send an E-mail to [EMAIL PROTECTED], and
type "unsubscribe Declude.Virus".    The archives can be found
at http://www.mail-archive.com.



---
This E-mail came from the Declude.Virus mailing list.  To
unsubscribe, just send an E-mail to [EMAIL PROTECTED], and
type "unsubscribe Declude.Virus".    The archives can be found
at http://www.mail-archive.com.


---
This E-mail came from the Declude.Virus mailing list.  To
unsubscribe, just send an E-mail to [EMAIL PROTECTED], and
type "unsubscribe Declude.Virus".    The archives can be found
at http://www.mail-archive.com.




---
This E-mail came from the Declude.Virus mailing list.  To
unsubscribe, just send an E-mail to [EMAIL PROTECTED], and
type "unsubscribe Declude.Virus".    The archives can be found
at http://www.mail-archive.com.



---
This E-mail came from the Declude.Virus mailing list.  To
unsubscribe, just send an E-mail to [EMAIL PROTECTED], and
type "unsubscribe Declude.Virus".    The archives can be found
at http://www.mail-archive.com.




---
This E-mail came from the Declude.Virus mailing list.  To
unsubscribe, just send an E-mail to [EMAIL PROTECTED], and
type "unsubscribe Declude.Virus".    The archives can be found
at http://www.mail-archive.com.




---
This E-mail came from the Declude.Virus mailing list.  To
unsubscribe, just send an E-mail to [EMAIL PROTECTED], and
type "unsubscribe Declude.Virus".    The archives can be found
at http://www.mail-archive.com.




---
This E-mail came from the Declude.Virus mailing list.  To
unsubscribe, just send an E-mail to [EMAIL PROTECTED], and
type "unsubscribe Declude.Virus".    The archives can be found
at http://www.mail-archive.com.

Reply via email to