It seems that 1.3 doesn't have a Developer Menu (I saw the same thing that you did). But in the same place that you checked "Developer Menu" you can also enable remote debugging, which enables adb.
Dave Hylands ----- Original Message ----- > From: "V-X -F" <[email protected]> > To: "Dave Hylands" <[email protected]> > Cc: [email protected] > Sent: Tuesday, July 29, 2014 10:20:52 PM > Subject: Re: [b2g] B2G 2.1 build for flame fails > Hi Dave, > Thanks for the great instructions. > 1. I've enabled the Developer Menu in the developer settings. > 2. When I go back to the main settings I don't see the "Developer" menu near > the bottom of the main settings screen. > I'm running the Firefox Flame with OS Version 1.3.0.0-prerelease > Thanks for your help! > VXF > On 26 July 2014 04:55, Dave Hylands < [email protected] > wrote: > > Hi, > > > You need to enable ADB, since it's disabled by default. > > > 1 - Eanble the developer menu. This is in Settings->Device > > Information->More > > Information at the very bottom. (there were some changes about this so if > > you don't have this let us know) > > > 2 - Then when you go back out to the main menu, you should see a > > "Developer" > > menu near the bottom of the main Settings app. > > > 3 - Go into the Developer menu and set "Debugging via USB" to ADB Only. If > > it > > already says something other than Disabled, then set it to disabled first > > (and press OK) and then go back and set it to ADB Only. > > > 4 - Now your device should show up > > > 5 - Back in the main menu, go under "Screen Lock" and set it to disabled. > > > Now back on your build machine > > > rm -rf backup-flame (if it exists) > > > rm -f out/target/product/flame/firmware.hash (if it exists) > > > If your flame doesn't show up in adb devices then there isn't much point in > > proceeding any futther until you can resolve that. > > > Dave Hylands > > > > From: " [email protected] " < [email protected] > > > > > > > To: [email protected] > > > > > > Sent: Thursday, July 17, 2014 1:36:22 AM > > > > > > Subject: Re: [b2g] B2G 2.1 build for flame fails > > > > > > Thanks for the help Jon, I've tried "adb devices" and my Flame doesn't > > > show > > > up, although two drives are mounted (OSX 10.9.x) both called "NO NAME", > > > one > > > is the phone and the other is a 32GB SD card. > > > > > > My Flame is definitely plugged directly into my MacBook Air, so I'm a bit > > > stumped :( > > > > > > Thanks in advance! > > > > > > VXF > > > > > > _______________________________________________ > > > > > > dev-b2g mailing list > > > > > > [email protected] > > > > > > https://lists.mozilla.org/listinfo/dev-b2g > > > > -- > Sincerely, > Vincent Xuan Feng > _______________________________________________ > dev-b2g mailing list > [email protected] > https://lists.mozilla.org/listinfo/dev-b2g
_______________________________________________ dev-b2g mailing list [email protected] https://lists.mozilla.org/listinfo/dev-b2g
