Ah cool, thanks for the clarification Dave, I'll try it out. VXF
On 3 August 2014 17:51, Dave Hylands <[email protected]> wrote: > It seems that 1.3 doesn't have a Developer Menu (I saw the same thing that > you did). But in the same place that you checked "Developer Menu" you can > also enable remote debugging, which enables adb. > > Dave Hylands > > ------------------------------ > > *From: *"V-X -F" <[email protected]> > *To: *"Dave Hylands" <[email protected]> > *Cc: *[email protected] > *Sent: *Tuesday, July 29, 2014 10:20:52 PM > > *Subject: *Re: [b2g] B2G 2.1 build for flame fails > > Hi Dave, > > Thanks for the great instructions. > > 1. I've enabled the Developer Menu in the developer settings. > 2. When I go back to the main settings I don't see the "Developer" menu > near the bottom of the main settings screen. > > > I'm running the Firefox Flame with OS Version 1.3.0.0-prerelease > > Thanks for your help! > > > VXF > > > On 26 July 2014 04:55, Dave Hylands <[email protected]> wrote: > >> Hi, >> >> You need to enable ADB, since it's disabled by default. >> >> 1 - Eanble the developer menu. This is in Settings->Device >> Information->More Information at the very bottom. (there were some changes >> about this so if you don't have this let us know) >> 2 - Then when you go back out to the main menu, you should see a >> "Developer" menu near the bottom of the main Settings app. >> 3 - Go into the Developer menu and set "Debugging via USB" to ADB Only. >> If it already says something other than Disabled, then set it to disabled >> first (and press OK) and then go back and set it to ADB Only. >> 4 - Now your device should show up >> 5 - Back in the main menu, go under "Screen Lock" and set it to disabled. >> >> Now back on your build machine >> rm -rf backup-flame (if it exists) >> rm -f out/target/product/flame/firmware.hash (if it exists) >> >> If your flame doesn't show up in adb devices then there isn't much point >> in proceeding any futther until you can resolve that. >> >> Dave Hylands >> >> ------------------------------ >> >> *From: *"[email protected]" <[email protected]> >> *To: *[email protected] >> *Sent: *Thursday, July 17, 2014 1:36:22 AM >> *Subject: *Re: [b2g] B2G 2.1 build for flame fails >> >> Thanks for the help Jon, I've tried "adb devices" and my Flame doesn't >> show up, although two drives are mounted (OSX 10.9.x) both called "NO >> NAME", one is the phone and the other is a 32GB SD card. >> >> My Flame is definitely plugged directly into my MacBook Air, so I'm a bit >> stumped :( >> >> Thanks in advance! >> >> VXF >> _______________________________________________ >> dev-b2g mailing list >> [email protected] >> https://lists.mozilla.org/listinfo/dev-b2g >> >> >> > > > -- > Sincerely, > > Vincent Xuan Feng > > _______________________________________________ > dev-b2g mailing list > [email protected] > https://lists.mozilla.org/listinfo/dev-b2g > > > -- Sincerely, Vincent Xuan Feng
_______________________________________________ dev-b2g mailing list [email protected] https://lists.mozilla.org/listinfo/dev-b2g
