Is this going to work on OSX? Or Linux only is verified? вт, 25 квіт. 2023 р. о 19:45 Brennan Ashton <bash...@brennanashton.com> пише:
> On Tue, Apr 25, 2023, 5:41 PM Brennan Ashton <bash...@brennanashton.com> > wrote: > > > > > On Tue, Apr 25, 2023, 5:36 PM Petro Karashchenko < > > petro.karashche...@gmail.com> wrote: > > > >> Hello, > >> > >> I'm starting to experiment with NuttX BLE support. I have a device that > I > >> can successfully pair with my phone and I would like to try pairing it > >> with > >> the NuttX based device. I chose ESP32 for my experiments. For now I > >> enabled > >> (and fixed) esp32-devkitc:ble configuration, but that is basically > all... > >> I > >> do not have much knowledge in bluetooth, but definitely want to master > it. > >> When I'm pairing from my phone I see the device name in the list of > >> scanned > >> devices, so the device advertises some human readable string in data. > Then > >> I'm running "bt bnep0 scan start" -> "bt bnep0 scan stop" -> "bt bnep0 > >> scan > >> get" on my ESP32 and expecting to see some of the same human readable > >> string in the printed output as I do not known the MAC address of my > >> device, but there is not such data sequence in "bt bnep0 scan get" > output. > >> I would appreciate some guidance for the BLE dummy like me, so I can > move > >> forward a bit. > >> > >> Best regards, > >> Petro > >> > > > > > > I have not touched it in a bit, but I found the sim support I added with > > the hci socket made debugging the Bluetooth stack a lot easier because I > > could use Wireshark/btmon on the actual host machine to show all the hci > > traffic to and from the NuttX stack transparently. I highly recommend > > trying that to verify there is not anything fundamentally broken. > > > > --Brennan > > > > I should probably have added this in more detail to the docs, but see the > testing section of the PR where I added it. I think it shows exactly what > you are trying to do > > https://github.com/apache/nuttx/pull/1655 > > > --Brennan >
