Does it take for you also that long when you hit the stop button until the recording UI does really stop and switch the button state ?
Can we have a look at the 1 hour recording, can you put that in the public folder too ? I created another video on demo.dataved.ru using a Windows machine. I put it into the public folder. This time the recording has not visual, only audio. I also cannot see any kind of error. The AVI file when I download it has less then 1 MB. Would you mind checking what was wrong with it? It is flvRecordingId 226. Thanks, Sebastian 2014-03-06 1:05 GMT+13:00 Maxim Solodovnik <[email protected]>: > I haven't monitored Red5 CPU usage > But the system is very responsive (Maybe because it is core i7 8 cores, > 8Gb) > I see no performance degradation. > > The stream is still being written to the disc asynchronously (this code was > slightly optimized) > I have put the recording made just now on my machine to the same public > group, you can check it. > > Vasiliy was able to create recording with duration ~1 hour (while > performing test plan for this RC) > > > On Wed, Mar 5, 2014 at 2:52 PM, [email protected] < > [email protected] > > wrote: > > > Hi Maxim, > > > > The other topics to be covered in another conversation, I think this > issue > > is worth a separated thread. > > > > "Could you please move your recording into Public (Openmeetings) group > so I > > can take a look at it?" > > => I did just that now. > > > > "All test recordings I have made were made locally, should will try to do > > it on demo." > > => I did try locally too, but the recordings are not really working. The > > recorded file freezes after 10-20 sec. Sound sometimes continues > sometimes > > sound stops too. > > > > If I start a recording I can see two processes jump in the CPU usage: > > 1) Screensharing application to 40-50% > > 2) The red5 server process jumps to 100%CPU (or what is leftover after > the > > screen-sharing webapp takes 40%) > > > > So did you monitor the red5 server process CPU while doing a > screen-sharing > > recording? > > I think the high server side CPU usage might be also the reason why when > > you click on the stop recording button for ages just nothing happens. > > > > We had a similar problem in the past where the red5 cpu started to use > 100% > > of the CPU while recording. The issue at that time was that the packets > > could not be written fast enough to disk. So I implemented the asynch > > stream writer with the BlockingQueue that caches the packets and starts a > > separated Thread to write the packets to disk in a reasonable interval. > > That is also why there is this wait period/check in the recordings > > processing that needs to wait until all data really is written to disk > > [see: BaseConverter#waitForTheStream()]. > > At that point in time that seemed to solve the problem. > > > > However the source of the issue might be also a purely red5 related > issue. > > Nevertheless I think we need to solve/verify it. > > > > At some point the screen-sharing webapp became just completely > > unresponsive. And only by killing the process of the screen-sharing app > the > > red5 server side process did also reduce CPU usage to a reasonable level. > > > > Do you experience a similar problem with the red5 server process while > > doing a recording ? > > I do not completely deny that it might be also a hardware problem, for > > instance if the disk is too slow. But I am using a SSD flash disk :) So > > that should be fast enough :) However in the future we might need to > > revisit the write speed for the stream writer that writes the queue to > > disk. > > > > The problem with this high Red5 Cpu usage in the past was also that it > will > > slow down pretty much anything, for instance all other streams even in > > other conference rooms will become slow-motion, funny sound effects et > > cetera. > > > > Sebastian > > > > > > > > 2014-03-04 23:47 GMT+13:00 Maxim Solodovnik <[email protected]>: > > > > > Hello Sebastian, > > > > > > Thanks for detailed testing > > > > > > Could you please move your recording into Public (Openmeetings) group > so > > I > > > can take a look at it? > > > All test recordings I have made were made locally, should will try to > do > > it > > > on demo. > > > > > > now will try to answer in bullet list: > > > 1) "Can we make it that somehow that it will be displayed directly" I > can > > > propose to choose an icon from FamFam set (for ex. time.png, > > hourglass.png, > > > clock.png, clock_pause.png) will appreciate any help on this since I > > > personally not really like all the icons I have mentioned. > > > > > > 2) "Previously you did get the pop warning 'not ready' directly on a > > click > > > on the recording when it is not yet ready for viewing." I don't really > > like > > > those pop ups since I find it annoying, I believe correct icon is > better > > > solution. (Maybe tooltip should be added) > > > > > > 3) "but I cannot load the debug window on that server." currently debug > > is > > > only available if wicket is run in debug mode, this might need to be > > > corrected (or maybe not since room should be rewritten) > > > > > > 4) Also you send me another issue report: contact request email has > > fields > > > mixed up (from and to user names are mixed) > > > > > > 5) "What about the attribute 'length' of the recording" this fild of > the > > > recording is not being filled. What should be written in it? recording > > > duration? recording file length? > > > > > > 6) Appointments inside private messages were reported to was broken in > > > previous versions as well, so we need to file an issue and fix in in > > > 3.1.0/3.0.1 > > > > > > What is your resume? > > > Should we release or wait for RC3? what of the above are blockers? > > > > > > > > > > > > On Tue, Mar 4, 2014 at 3:27 PM, [email protected] < > > > [email protected] > > > > wrote: > > > > > > > "not ready status will be displayed after click on "!" icon in the > > > popup." > > > > I did not get a not ready status displayed. I see the icon on the > left, > > > but > > > > neither by clicking on the icon nor on the recording anything > happens. > > > > > > > > Can we make it that somehow that it will be displayed directly when > you > > > > click on the recording? > > > > > > > > Having links that you click and under some circumstances nothing > > happens > > > > are just very hard to understand for end-users. Previously you did > get > > > the > > > > pop warning 'not ready' directly on a click on the recording when it > is > > > not > > > > yet ready for viewing. > > > > > > > > I tried to do three recordings on demo.dataved.ru, all failed. > > Possibly > > > > because I am using Mac and/or bandwidth issues. > > > > I was able to produce a recording at the 06th of February on that > > server > > > > with a Mac, so it is not a general issue. > > > > In the error log window I can see some ffmpeg command fails (see > > attached > > > > on the bottom of the mail some example) > > > > > > > > But the screen sharer itself stayed at 50% of the CPU which is > > acceptable > > > > for the first release of 3.x.x from my point of view. > > > > Just to get some recordings produced with it would be something I > would > > > be > > > > keen to verify. > > > > > > > > Another issues was that I cannot enter a room on > demo.dataved.ruafter a > > > > while. I just stuck in the screen when the loading bar in front of > > > entering > > > > the conference room is complete. I guess there is some null pointer > > > > exception in the code but I cannot load the debug window on that > > server. > > > > I was using the "remember me" cookie, after deleting the cookie and > > > > re-login entering the room did work again. > > > > > > > > What about the attribute "length" of the recording in the UI, the > field > > > > seems to be simply not filled with any value yet, even if the > recording > > > was > > > > successful. Is that not implemented yet? > > > > > > > > Btw the autocomplete box in the private message center and calendar > is > > > > a-w-e-s-o-m-e > > > > I think we should leave it as is. Normally you can only send messages > > to > > > > your contacts, but I think like that it is even better. The old one > was > > > too > > > > restrictive to be intuitive. > > > > When attaching a meeting request with a date/time to a private > message > > > ... > > > > it did not show up in my calendar afterwards. Is that something that > > > needs > > > > to done still ? > > > > > > > > This is the FFMPEG error on all my recordings: > > > > process: previewFullFLV command: ffmpeg -i > > > > > > > > > > > > > > /opt/openmeetings-3.0.0.r1573575/webapps/openmeetings/streams/hibernate/flvRecording_210.flv > > > > -vcodec mjpeg -vframes 1 -an -f rawvideo -s 1072x672 > > > > > > > > > > > > > > /opt/openmeetings-3.0.0.r1573575/webapps/openmeetings/streams/hibernate/flvRecording_210.jpg > > > > exception: null error: ffmpeg version git-2013-10-22-c68faca > Copyright > > > (c) > > > > 2000-2013 the FFmpeg developers built on Oct 22 2013 12:58:25 with > gcc > > > 4.6 > > > > (Ubuntu/Linaro 4.6.3-1ubuntu5) configuration: > > --prefix=/root/ffmpeg_build > > > > --extra-cflags=-I/root/ffmpeg_build/include > > > > --extra-ldflags=-L/root/ffmpeg_build/lib --bindir=/root/bin > > > > --extra-libs=-ldl --enable-gpl --enable-libass --enable-libfdk-aac > > > > --enable-libmp3lame --enable-libopus --enable-libtheora > > > --enable-libvorbis > > > > --enable-libvpx --enable-libx264 --enable-nonfree --enable-x11grab > > > > libavutil 52. 47.101 / 52. 47.101 libavcodec 55. 37.102 / 55. 37.102 > > > > libavformat 55. 19.103 / 55. 19.103 libavdevice 55. 4.100 / 55. 4.100 > > > > libavfilter 3. 89.100 / 3. 89.100 libswscale 2. 5.101 / 2. 5.101 > > > > libswresample 0. 17.104 / 0. 17.104 libpostproc 52. 3.100 / 52. > 3.100 > > > [flv > > > > @ 0x3693900] Could not find codec parameters for stream 0 (Video: > none, > > > 200 > > > > kb/s): unspecified size Consider increasing the value for the > > > > 'analyzeduration' and 'probesize' options Input #0, flv, from > > > > > > > > > > > > > > '/opt/openmeetings-3.0.0.r1573575/webapps/openmeetings/streams/hibernate/flvRecording_210.flv': > > > > Metadata: noaudiocodec : 0 server : Red5 Server 1.0.0 RC3 Rev: 4393 > > > > creationdate : Tue Mar 04 08:04:03 CET 2014 canSeekToEnd : true > > encoder : > > > > Lavf55.19.103 Duration: 00:01:28.87, start: 0.000000, bitrate: 593 > kb/s > > > > Stream #0:0: Video: none, 200 kb/s, 1k tbr, 1k tbn, 1k tbc Stream > #0:1: > > > > Audio: mp3, 22050 Hz, mono, s16p, 32 kb/s Output #0, rawvideo, to > > > > > > > > > > > > > > '/opt/openmeetings-3.0.0.r1573575/webapps/openmeetings/streams/hibernate/flvRecording_210.jpg': > > > > Metadata: noaudiocodec : 0 server : Red5 Server 1.0.0 RC3 Rev: 4393 > > > > creationdate : Tue Mar 04 08:04:03 CET 2014 canSeekToEnd : true > > encoder : > > > > Lavf55.19.103 Output file #0 does not contain any stream exitValue: > > null > > > > out: > > > > > > > > Sebastian > > > > > > > > > > > > > > > > 2014-03-04 20:18 GMT+13:00 Maxim Solodovnik <[email protected]>: > > > > > > > > > Currently "not ready" recordings are marked as "broken" (same "!" > > icon) > > > > > not ready status will be displayed after click on "!" icon in the > > > popup. > > > > > > > > > > interview recordings are now converted as fast as ordinary > > recordings. > > > > > > > > > > Icon can be changed, please suggest one :) (Do you feel it is > > blocker? > > > or > > > > > maybe we can release 3.0.1 will all such minor fixes?) > > > > > > > > > > > > > > > http://demo.dataved.ru:5080/ contains the same SNAPSHOT > > > > > > > > > > > > > > > > > > > > On Tue, Mar 4, 2014 at 2:12 PM, [email protected] < > > > > > [email protected] > > > > > > wrote: > > > > > > > > > > > I think there is still a slight glitch with the recordings UI. > > > > > > > > > > > > Previously, when a recording was not yet ready for viewing > (because > > > it > > > > is > > > > > > still processing) there was a message in the UI telling you that. > > In > > > > the > > > > > > case of interviews there was even a progress includes in > > percentages > > > as > > > > > > interviews take 1 minutes of processing time for the rendering of > > a 1 > > > > > > minute of video. > > > > > > > > > > > > If you at the moment are too fast in switching to the UI and > there > > > was > > > > > some > > > > > > kind of error or its kind of simply not ready for viewing you > click > > > on > > > > > the > > > > > > video and just nothing happens. > > > > > > > > > > > > What is the current mechanism? Do we catch in the recordings UI > if > > > the > > > > > > video is ready for viewing or not? > > > > > > > > > > > > Thanks, > > > > > > Sebastian > > > > > > > > > > > > > > > > > > 2014-03-04 19:54 GMT+13:00 [email protected] < > > > > [email protected] > > > > > >: > > > > > > > > > > > > > Well if its just me I do not want to complain. > > > > > > > I am using a Mac, probably that is part of the problem. > > > > > > > > > > > > > > Let me try to run a couple of tests. > > > > > > > > > > > > > > Btw: Is http://demo.dataved.ru:5080/ the same SNAPSHOT that is > > up > > > > for > > > > > a > > > > > > > vote? > > > > > > > > > > > > > > Thanks! > > > > > > > Sebastian > > > > > > > > > > > > > > > > > > > > > 2014-03-04 17:14 GMT+13:00 Maxim Solodovnik < > > [email protected] > > > >: > > > > > > > > > > > > > > Hello Sebastian, > > > > > > >> > > > > > > >> I was unable to fix high CPU usage because I can't see it :( > > > > > > >> We have tried to reproduce it on our machines (me and Vasiliy, > > > > Vasiliy > > > > > > >> provides you with his measurements), but it is not > reproducible. > > > > > > >> No additional comments were provided, so this issue have been > > > > > postponed > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > >> On Tue, Mar 4, 2014 at 11:08 AM, [email protected] < > > > > > > >> [email protected]> wrote: > > > > > > >> > > > > > > >> > Hi Maxim, > > > > > > >> > > > > > > > >> > Thanks, I think one of the major obstacles has been the CPU > > > usage > > > > of > > > > > > the > > > > > > >> > screen sharing application. > > > > > > >> > Did we reduce the CPU usage significantly? > > > > > > >> > > > > > > > >> > Thanks, > > > > > > >> > Sebastian > > > > > > >> > > > > > > > >> > > > > > > > >> > > > > > > > >> > > > > > > > >> > > > > > > > >> > > > > > > > >> > 2014-03-04 5:41 GMT+13:00 Alvaro <[email protected]>: > > > > > > >> > > > > > > > >> > > +1 > > > > > > >> > > > > > > > > >> > > ------------------- > > > > > > >> > > > > > > > > >> > > > > > > > > >> > > El lun, 03-03-2014 a las 23:09 +0700, Maxim Solodovnik > > > escribió: > > > > > > >> > > > Dear OpenMeetings Community, > > > > > > >> > > > > > > > > > >> > > > I would like to start a vote about releasing Apache > > > > OpenMeetings > > > > > > >> 3.0.0 > > > > > > >> > > RC2 > > > > > > >> > > > > > > > > > >> > > > Main changes are covered in the > > > > > > >> > > > Readme: > > > > > > >> > > > > > > > https://svn.apache.org/repos/asf/openmeetings/tags/3.0.0RC2/README > > > > > > >> > > > > > > > > > >> > > > Full Changelog: > > > > > > >> > > > > > > > > > >> > > > > > https://svn.apache.org/repos/asf/openmeetings/tags/3.0.0RC2/CHANGELOG > > > > > > >> > > > > > > > > > >> > > > Release artefacts: > > > > > > >> > > > > > > > https://dist.apache.org/repos/dist/dev/openmeetings/3.0.0/rc2/ > > > > > > >> > > > > > > > > > >> > > > Tag: > > > > > https://svn.apache.org/repos/asf/openmeetings/tags/3.0.0RC2/ > > > > > > >> > > > > > > > > > >> > > > PGP release keys (signed using > > > > > > >> > > > C467526E): > > > > > > >> > > > > > > > https://dist.apache.org/repos/dist/dev/openmeetings/3.0.0/rc2/KEYS > > > > > > >> > > > > > > > > > >> > > > Vote will be open for 72 hours. > > > > > > >> > > > > > > > > > >> > > > [ ] +1 approve > > > > > > >> > > > [ ] +0 no opinion > > > > > > >> > > > [ ] -1 disapprove (and reason why) > > > > > > >> > > > > > > > > > >> > > > My vote is +1. > > > > > > >> > > > > > > > > > >> > > > > > > > > > >> > > > > > > > > >> > > > > > > > > >> > > > > > > > > >> > > > > > > > >> > > > > > > > >> > -- > > > > > > >> > Sebastian Wagner > > > > > > >> > https://twitter.com/#!/dead_lock > > > > > > >> > http://www.webbase-design.de > > > > > > >> > http://www.wagner-sebastian.com > > > > > > >> > [email protected] > > > > > > >> > > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > >> -- > > > > > > >> WBR > > > > > > >> Maxim aka solomax > > > > > > >> > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > Sebastian Wagner > > > > > > > https://twitter.com/#!/dead_lock > > > > > > > http://www.webbase-design.de > > > > > > > http://www.wagner-sebastian.com > > > > > > > [email protected] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > Sebastian Wagner > > > > > > https://twitter.com/#!/dead_lock > > > > > > http://www.webbase-design.de > > > > > > http://www.wagner-sebastian.com > > > > > > [email protected] > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > WBR > > > > > Maxim aka solomax > > > > > > > > > > > > > > > > > > > > > -- > > > > Sebastian Wagner > > > > https://twitter.com/#!/dead_lock > > > > http://www.webbase-design.de > > > > http://www.wagner-sebastian.com > > > > [email protected] > > > > > > > > > > > > > > > > -- > > > WBR > > > Maxim aka solomax > > > > > > > > > > > -- > > Sebastian Wagner > > https://twitter.com/#!/dead_lock > > http://www.webbase-design.de > > http://www.wagner-sebastian.com > > [email protected] > > > > > > -- > WBR > Maxim aka solomax > -- Sebastian Wagner https://twitter.com/#!/dead_lock http://www.webbase-design.de http://www.wagner-sebastian.com [email protected]
