Hi, > Since routing of P[7:0] is went through L3 inside pcb, so I suggest no > need to cut traces on P[7:0] or directly soldering. That's a little > kind of hard. Take apart the one on pcb first then diretly use a new > U21, "raise up" those pins P[7:0] and P[15:8] on IC body first. Then > hand soldering the new one on the pcb and use wires to solder.
Pls ignore my above suggestion, it depends on preventing default conflict of level between U21 and fpga after power on initialization. The setting of OF_SEL[3:0] at 8-bit @ LLC1 4:2:2 (default) is yes Three-state. Directly solder wires from P[15:8] to P[7:0] on pins should be ok. Adam _______________________________________________ http://lists.milkymist.org/listinfo.cgi/devel-milkymist.org IRC: #milkym...@freenode Webchat: www.milkymist.org/irc.html Wiki: www.milkymist.org/wiki
