Hi,

> Pls commment this newest routed file. Thanks.

* WTF is J22 (and R59)? Unless it has a good reason to be there, please
  remove it and restore the previous VGA routing.
* FPGA decoupling: place the 0402 1V2 capacitors closer to the center.
  The larger 0805 capacitors can go further away from the center. For
  example, C53 and C54 should be moved somewhere else and their current
  position taken by 0402 capacitors. Move as many 0402 1V2 capacitors
  as possible under the FPGA and close to the center.
* OK not to change the few remaining shared power vias. At least there
  is no via sharing anymore on 1V2 which is where the worst bugs could
  occur.
* New small addition: please indicate "Not 5V tolerant" near J21 (GPIO
  expansion)
* I can't find the footprint "SO8-10-2.54" for the optoisolator in
  MilkymistOne.PcbLib - please add it. Also, link the footprint in
  MilkymistOne.SchLib like it's done for other parts.
* What is the reference document you used for making the optoisolator
  PCB footprint (so I can check it)? Is it the Fairchild datasheet that
  you've linked in the BoM? In this case I need to update the
  milkymist-datasheets repository that contains a datasheet for Vishay
  parts with different footprints.
* You do not need to add that many 100uF capacitors on the DRAM. It's
  mostly high frequency noise that we are filtering. Use only one extra
  100uF per chip instead of 4.

> c) Current soucring status is here.
> http://en.qi-hardware.com/wiki/Milkymist_One_RC2_BOM

Have you updated the prices as well?

> d) To be done later:
> http://en.qi-hardware.com/wiki/Milkymist_One_run_2_schedule#Packaging_Parts_Accessaries
> Anti-Static bags, box and positioners.

Contents the box:
* MM1 board
* JTAG adapter
* 5V power supply
* leaflet (print the MAC addresses on it?)
* USB cable for the JTAG adapter (do we include one or assume people
  already have it)?
* Fedora USB drive?

Thanks,
S.
_______________________________________________
http://lists.milkymist.org/listinfo.cgi/devel-milkymist.org
IRC: #milkym...@freenode
Twitter: www.twitter.com/milkymistvj

Reply via email to