Hi Sébastien, > You may also want to run the testing tool at > http://www.milkymist.org/test_tool/boot.bin > use this command to run (with the jtag/serial cable connected): > flterm --port /dev/ttyUSB0 --kernel boot.bin > and type "serialboot" at the BIOS prompt (you'll need to abort automatic > booting by hitting the Q or ESC key). > This could give more information and potentially easy solutions than > just observing the video effects.
thanks. I will give it a try. >> For the output, I tried a headphone as well as a set of active speakers > > And what input did you use? I just connected the headphone connector of my Thinkpad with the audio input of MM1. But the audio input does not seem to have any effect on the noise. Even with no audio input at all, the noise is there. Also the noise volume remains always at the same level (except during the MM1 boot - prior the GUI becomes visible, there is silence), independent from the volume of the audio source, if connected. Norman _______________________________________________ http://lists.milkymist.org/listinfo.cgi/devel-milkymist.org IRC: #milkymist@Freenode Twitter: www.twitter.com/milkymistvj Ideas? http://milkymist.uservoice.com
