Hi Sebastien, On 03/17/2011 05:59 PM, Sebastien Bourdeauducq wrote: > You may also want to run the testing tool at > http://www.milkymist.org/test_tool/boot.bin > use this command to run (with the jtag/serial cable connected): > flterm --port /dev/ttyUSB0 --kernel boot.bin > and type "serialboot" at the BIOS prompt (you'll need to abort automatic > booting by hitting the Q or ESC key). > This could give more information and potentially easy solutions than > just observing the video effects.
please see the attachment for the output of the boot.bin test program. The noise starts right after the test beep and never stops - it continues even after the final message. Apart from the constant noise, microphone recording and playback seems to work. The same for line in recording and playback. - I wonder then why the input has no effect on the effects in flickernoise? However, the noise is not influenced by any user interaction as seen in your cool video. Who had thought that Milkymist would spawn an entirely new music genre? Cheers Norman
[FLTERM] Starting... serialboot I: Attempting serial firmware loading sL5DdSMmkekro [FLTERM] Received firmware download request from the device. [FLTERM] Uploading kernel (60208 bytes)... [FLTERM] Upload complete (8.8KB/s). [FLTERM] Booting the device. [FLTERM] Done. *** Milkymist One automated tests starting... *** Running tests in category: SDRAM A8: [ PASSED ] A9: [ PASSED ] A10: [ PASSED ] A11: [ PASSED ] A12: [ PASSED ] Random pattern: [ PASSED ] Hammer pattern: [ PASSED ] Crosstalk pattern: [ PASSED ] *** Running tests in category: GPIO SW1: Press the button. f to fail test, s to skip. [ PASSED ] SW2: Press the button. f to fail test, s to skip. [ PASSED ] SW3: Press the button. f to fail test, s to skip. [ PASSED ] LED2: Is the LED on? (y/n/s) [ PASSED ] LED3: Is the LED on? (y/n/s) [ PASSED ] *** Running tests in category: VGA DDC: [ PASSED ] Test card: Is the picture OK? (y/n/s) [ PASSED ] *** Running tests in category: Memory card Card initialization: [ FAILED ] Block read: [ FAILED ] *** Running tests in category: Audio Codec probe: [ PASSED ] Line and headphones outputs: Is the test tone OK? (y/n/s/r) [ PASSED ] Microphone: Recording...Playing... Is the audio played back? (y/n/s/r) [ PASSED ] Line input: Recording...Playing... Is the audio played back? (y/n/s/r) [ PASSED ] *** Running tests in category: Ethernet MDIO: Unexpected PHY ID: 0045 [ FAILED ] ARP resolution: [ FAILED ] *** Running tests in category: Video input Decoder probe: VIN: I2C bus initialized [ PASSED ] Capture: Press a key to start capturing Waiting for a captured frame. f to fail test, s to skip. LOCKS: 2 AD_RESULT: 4 Is the picture OK? (y/n) [ FAILED ] *** Running tests in category: MIDI Loopback: [ FAILED ] *** Running tests in category: DMX512 Loopback: [ FAILED ] *** Running tests in category: Infrared RC5 reception: Press the remote's "power" button... Waiting for remote. f to fail test, s to skip. [ SKIPPED ] *** Running tests in category: USB Port A: USB: loading Navre firmware USB: starting host controller USB: HC: softusb-input v1.0RC3 Press ENTER at the USB keyboard or press the left mouse button... USB: HC: Low speed device on port A USB: HC: Low speed device on port B USB: HC: VID: 045E, PID: 0040 USB: HC: VID: 046D, PID: C312 USB: HC: Found mouse USB: HC: Found keyboard [ PASSED ] Port B: Press ENTER at the USB keyboard or press the left mouse button... [ PASSED ] ******** TEST SUMMARY ******** Failed tests: - Memory card/Card initialization - Memory card/Block read - Ethernet/MDIO - Ethernet/ARP resolution - Video input/Capture - MIDI/Loopback - DMX512/Loopback Skipped tests: 1 Failed tests: 7 Passed tests: 22 Total tests: 30 ******** SOME TESTS FAILED ******** ******** THERE WERE SOME SKIPPED TESTS ******** *** Power off/reset board now...
_______________________________________________ http://lists.milkymist.org/listinfo.cgi/devel-milkymist.org IRC: #milkymist@Freenode Twitter: www.twitter.com/milkymistvj Ideas? http://milkymist.uservoice.com
