Hi, Javier Tend to modify the broadcast/multicast rate following this:
http://www.spinics.net/lists/linux-wireless/msg59686.html but where should we add this configuration in mesh_setup or mesh_config. Please advice. Thanks Regards, Chun-Yeow On Tue, Oct 25, 2011 at 1:01 PM, Javier Cardona <[email protected]> wrote: > On Mon, Oct 24, 2011 at 9:49 PM, Yeoh Chun-Yeow <[email protected]> > wrote: > > Dear Javier and Thomas, > > I have tried to test the multicast using the VLC streaming. The movie of > > about 1Mbps is not able to receive properly in one of PC wired connected > to > > the mesh node. > > After checking with wireshark, I observed that multicast traffic via mesh > > node is transmitted using the lowest transmission rate [6Mbps 802.11a]. > Is > > this specified in the 802.11s standard to use the lowest transmission > rate? > > I don't think it is specified. It's just common practice to use the > lowest rate for > broadcast and multicast traffic as it provides the greatest coverage. > I don't think it is configurable at this time, but it would be very > simple to do. > > Cheers, > > Javier > > > -- > Javier Cardona > cozybit Inc. > http://www.cozybit.com >
_______________________________________________ Devel mailing list [email protected] http://open80211s.com/mailman/listinfo/devel
