Hi, Javier FYI, I have completed the patches for increasing the broadcast/multicast rate at least up to 54Mbps.
It can be configured using "iw mesh0 mesh join meshnetwork mesh-mcast_rate 54". Regards, Chun-Yeow On Wed, Oct 26, 2011 at 12:34 AM, Javier Cardona <[email protected]> wrote: > Yeoh, > > On Tue, Oct 25, 2011 at 3:20 AM, Yeoh Chun-Yeow <[email protected]> > wrote: > > Hi, Javier > > Tend to modify the broadcast/multicast rate following this: > > http://www.spinics.net/lists/linux-wireless/msg59686.html > > but where should we add this configuration in mesh_setup or mesh_config. > > Please advice. Thanks > > Regards, > > Chun-Yeow > > config is done once, when the mesh interface is created. > setup is done every time we join a mesh network. > > You can add it wherever it makes more sense for your intended use. > > Cheers, > > Javier > > > On Tue, Oct 25, 2011 at 1:01 PM, Javier Cardona <[email protected]> > wrote: > >> > >> On Mon, Oct 24, 2011 at 9:49 PM, Yeoh Chun-Yeow <[email protected] > > > >> wrote: > >> > Dear Javier and Thomas, > >> > I have tried to test the multicast using the VLC streaming. The movie > of > >> > about 1Mbps is not able to receive properly in one of PC wired > connected > >> > to > >> > the mesh node. > >> > After checking with wireshark, I observed that multicast traffic via > >> > mesh > >> > node is transmitted using the lowest transmission rate [6Mbps > 802.11a]. > >> > Is > >> > this specified in the 802.11s standard to use the lowest transmission > >> > rate? > >> > >> I don't think it is specified. It's just common practice to use the > >> lowest rate for > >> broadcast and multicast traffic as it provides the greatest coverage. > >> I don't think it is configurable at this time, but it would be very > >> simple to do. > >> > >> Cheers, > >> > >> Javier > >> > >> > >> -- > >> Javier Cardona > >> cozybit Inc. > >> http://www.cozybit.com > > > > > > > > -- > Javier Cardona > cozybit Inc. > http://www.cozybit.com >
_______________________________________________ Devel mailing list [email protected] http://open80211s.com/mailman/listinfo/devel
