Hi Guys, first of all: Thanks for the support. It runs!
The right (working) connections for me are: Fonera : USB Uart GND : X1 and X5 RX : X2 TX : X3 3V3 : not needed!!! So I got now full serial console access ;-) After that: http://www.dd-wrt.com/routerdb/de/download.php?file=1970 Worked fine for me. Thank you very much! Greetingz, Christian On Tue, 2010-04-27 at 22:13 +0200, christian wrote: > On Tue, 2010-04-27 at 16:32 +0200, Inouk Bourgon wrote: > > christian wrote: > > > I've connected the pins in that way: > > > > > > Fonera : USB Uart > > > GND : X1 / X5 connected > > > RX : X3 > > > TX : X4 > > > 3V3 : X2 > > > > > > Is there any problem with the circuits? I got no idea > > > > > > > I think it should be: > > Fonera : USB Uart > > GND : X5 > > RX : X3 > > TX : X2 > > 3V3 : X1 > > > > If I use these settings there is nothing. > Trying with my old configuration I get a lot of weird (\0x00) stuff. > ;-( > > Don't know what to do. Two devices are *dead* ;-((( > Christian _______________________________________________ Development mailing list Development@fonosfera.org http://fonosfera.org/mailman/listinfo/development