Try checking the Gigaset settings especially whether your STUN server setting is correct. You should check your configuration with the data you've received from your SIP provider.
I'm using a Gigaset S685IP behind a 2.0n with 2.3.6.0 for several months as my main phone without running into any problems. It should work fine with the out- of-the box configuration and there should be no need to reconfigure the fonera. SIP uses a service called STUN to work around NAT and stuff if it is set up properly. Am Mittwoch 11 August 2010, 08:05:11 schrieb Dani Dee: > Hello yanu! > > Thank u for your email, BUT it did Not work. Any other ideas?? > > bye > > Dani > > On 10 August 2010 23:20, yanu <[email protected]> wrote: > > Op (10/08/10 22:39), Dani Dee schreef: > > > So what do u suggest that I shall do?? Who to write to?? > > > > You have to passthrough ports through your fonera: > > > > - Authentication-port 5060 TCP+UDP > > - Voice-ports 10500-20000 UDP (i took these ports) > > > > These ports can be set in the fonera here: > > Dashboard >> Settings >> Firewall >> Port Forwarding > > > > TCP+UDP 5060 192.168.1.200 5060 > > UDP 10500-20000 192.168.1.200 10500-20000 > > > > Off course, everything on the phone must be correct. > > -- > > Groeten Lieven Baes aka yanu > > > > _______________________________________________ > > Development mailing list > > [email protected] > > http://fonosfera.org/mailman/listinfo/development _______________________________________________ Development mailing list [email protected] http://fonosfera.org/mailman/listinfo/development
