> This works out (looking at other vales in the output) at between 28 and > 59 ms or about 17 to 36 Hz! Should it be varying this much?! > > If I turn off the DLOP_FIELD_PARITY stuff, the times work out between > about 33 and 55 ms (ca. 18 - 33 Hz). > > I'm not sure whether this output is any use or not.
Yes, it's of use: On average, you're generating 25 frames/sec which is fine (Stefan's comments already cleared this one up), but sometimes there's a longer delay between frames. As I mentioned earlier, if it takes longer than 'a bit less than 0.04secs' (actually probably about 35ms) then you'll have problems. Would you like to try my highly experimental kernel flipping patch? You'll need an up to date CVS snapshot to start with. Cheers, Mark _______________________________________________ directfb-users mailing list [email protected] http://mail.directfb.org/cgi-bin/mailman/listinfo/directfb-users
