Denis Oliver Kropp wrote: > Keith Williams wrote: >> Hi, >> >> I am porting a device driver for the Epson S1D13506 (should work for >> the rest of the family as well). So far, an 'unaccelerated' version >> registers and df_dok runs with the same results of running with >> straight Linux Framebuffer. I'm now trying to enable some >> acceleration (filled rectangles seems easiest and what I've written). >> Essentially, the driver tries to go, but fails when the acceleration >> registers are written to--DirectFB catches an invalid address. >> >> So, I'm half way between two implementations. First, I have placed >> directfbrc in /etc and have modified the required information in it. >> I have configured DirectFB to support devmem, but DirectFB is >> consistently falling back to fbdev. Obviously, with devmem not >> going, the device registers are not mmap'd causing my failure. > > Did you set "system = devmem"? > > Maybe your sysconfdir is /usr/local/etc? > Thanks. The /usr/local/etc move did the trick.....on to implementing layers/screens.
Keith _______________________________________________ directfb-users mailing list directfb-users@directfb.org http://mail.directfb.org/cgi-bin/mailman/listinfo/directfb-users
