Keith Williams wrote: > Denis Oliver Kropp wrote: >> Keith Williams wrote: >>> Hi, >>> >>> I am porting a device driver for the Epson S1D13506 (should work for >>> the rest of the family as well). So far, an 'unaccelerated' version >>> registers and df_dok runs with the same results of running with >>> straight Linux Framebuffer. I'm now trying to enable some >>> acceleration (filled rectangles seems easiest and what I've written). >>> Essentially, the driver tries to go, but fails when the acceleration >>> registers are written to--DirectFB catches an invalid address. >>> >>> So, I'm half way between two implementations. First, I have placed >>> directfbrc in /etc and have modified the required information in it. >>> I have configured DirectFB to support devmem, but DirectFB is >>> consistently falling back to fbdev. Obviously, with devmem not >>> going, the device registers are not mmap'd causing my failure. >> >> Did you set "system = devmem"? >> >> Maybe your sysconfdir is /usr/local/etc? >> > Thanks. The /usr/local/etc move did the trick.....on to implementing > layers/screens.
Great! It's so much easier without the FBDev API sitting in your way :) -- Best regards, Denis Oliver Kropp .------------------------------------------. | DirectFB - Hardware accelerated graphics | | http://www.directfb.org/ | "------------------------------------------" _______________________________________________ directfb-users mailing list directfb-users@directfb.org http://mail.directfb.org/cgi-bin/mailman/listinfo/directfb-users
