Hi, Hope my experiences help. I did the same thing with an old all in one router/modem/wifi box as I wanted it to stream over a distance of 2 feet to my SB3 (I know I could use a CAT5 cable!!).
What I found was the most important thing to do is stop the router that you intend to use as an AP from DHCP - let the router modem do that. Then I found that on some router/modem/wifi boxes you can disable the parts you do not need. But this does not matter as you can delete out all of the internet connection settings and as the router will not be physically connected it will not matter. I found that you will need to plug the router in to a laptop and manually configure the access list and WPA (i.e. put the SqueezeBox MAC address in and the WPA Key) via the web control page. Then connect it back on to the network. I found that you will now not be able to access the web control pages on the router until you disconnct from the network and in to a stand alone computer. In my set up my AP is physically connected via a CAT5 cable to the router/modem that is connected to the internet (the box that does the DHCP) -- Dr.Congo ------------------------------------------------------------------------ Dr.Congo's Profile: http://forums.slimdevices.com/member.php?userid=23205 View this thread: http://forums.slimdevices.com/showthread.php?t=58534 _______________________________________________ discuss mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/discuss
