anglecard48 wrote: > The instructions on the pCP page > (https://docs.picoreplayer.org/projects/add-topping-e30-usb-dac/ ) seem > to show a pick list that is different than the one I get in my piCP. See > attached, where I show the two side by side. > > When I try to type in the command "hw:CARD=D30,DEV=0" the system shuts > down Squeezelite and won't allow a reboot. As is seen in the attached > screen grab, I tried insted to select out of the list "hw:CARD=b1,DEV=0" > but that didn't produce any sound through my DAC to my hifi system. > > I did have the USB cable plugged into the correct outlet. > > Under the "Tweaks" tab near the bottom of the page is a group named USB > Audio Tweaks, which seems to mention DACs. I tried one of the selections > from the list. See the second attachment. No Soap.
Is the input on your DAC set to USB? *Server - LMS 8.2.0 *Pi4B 4GB/Argon one case/pCP v7.0.1 - 75K library, playlists & LMS cache on SSD (ntfs) *Study -* Pi4/pCP 7.0.1/Topping E30 DAC/Ruark MR1 Mk2 *Lounge* - Pi2/pCP 6.0.0 > HiFiBerry DIGI+ > AudioEngine DAC1 > AVI DM5 *Dining Room* - Pi3B/pCP/Bluetooth/Echo Show 8 *Garage* - DAC32 > Edifier speakers *Spares* - 2xTouch, 1xSB Radio. 1xSB3, 6xRPi ------------------------------------------------------------------------ kidstypike's Profile: http://forums.slimdevices.com/member.php?userid=10436 View this thread: http://forums.slimdevices.com/showthread.php?t=114796 _______________________________________________ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
