After reading your message and thinking about what you stated I
remember this feature being a must change feature in Tiger Mail.
Because I got use to the ability to hit enter on a messageI don't want
to change this behavior. I will not stop trying to figure it out but
my mail is acting funny, so I will do a complete install next month
and clear any posibility of hardware/software incompatibility issues.
I will put this on the back burner until I work out Leopard navigation
and familiarity. I just did the upgrade to test what programs would
work and to play around with the new cat so I would know what was
normal and what was not. Thanks
On Nov 2, 2007, at 5:09 PM, [EMAIL PROTECTED] wrote:
Hello!
There has been much discussion about using VO-J to jump between the
table of messages in Mail and the message text and back again...
Please remember that in order for this to work, the message area
must be visible on the screen... Many of us have disabled (hidden)
the message area by moving the splitter to the bottom of the screen.
If you have done this, when you press VO-J, you may hear the "no
more" beep (because there is nothing to jump to) or you may hear "to
linked item text, message body" but get the "no more" beep when you
try to read/enteract/navigate the message body.
Hope this helps explain why it works for some but not others...
Lou.
=== Original Message ===
Okay,
1 interact with message table
2 use VO and the right or left arrows to find a message field. I.E.
author or subject
3 use the standard up or down arrows to locate a message
4 press VO J
5 press VO J again after you hear the message being read to you
You should now be back in the message table
5 press delete if you want to to delete the message you just read...
HTH
