Hi all, I can now consistently boot into USBBOOT mode, thanks to help from the IRC (Thanks kristianpaul and xxXd!). I'm now having trouble with my desktop. On the first attempt after reboot, everything works wonderfully until the first attempt to write to the Nanonote's NAND:
usbboot :> nprog 1024 openwrt-xburst-qi_lb60-uImage.bin 0 0 -n Programing No.0 device, flen 1753752, start page 1024... CPU data: Boot4740 Erasing No.0 device No.0 flash (start_blk 8 blk_num 4)...... Finish! Return: 00 06 00 00 00 00 00 00 (position 12) Force erase, no bad block infomation! Size to send 1753752, transfer_size 524288 Image type : without oob It will cause 4 times buffer transfer. Writing NAND page 1024 len 524288... CPU data: Boot4740 Finish! (len 524288 start_page 1024 page_num 128) Error - can't read bulk data from Ingenic device:-75 Error - can't read bulk data from Ingenic device:-34 Checking 524288 bytes... Comparing 524288 bytes - FAIL at off 3840, wrote 0xfb, read 0x0 off 3832 write: e3 e5 b8 c6 97 95 a3 31 fb 0d 2f ff 5e 88 31 b3 off 3832 read: e3 e5 b8 c6 97 95 a3 31 00 00 00 00 00 00 00 00 Error - can't retrieve XBurst CPU information: -34 Device unboot! Boot it first! End at Page: 1152 Writing NAND page 1152 len 524288... Error - can't retrieve XBurst CPU information: -34 Device unboot! Boot it first! If I attempt to reboot the Nanonote and reconnect it to the computer this error appears in "dmesg | tail": usb 2-2: device not accepting address 6, error -110 hub 2-0:1.0: unable to enumerate USB device on port 2 or usb 2-2: device descriptor read/64, error -110 A reboot allows me to connect the Nanonote, but does not allow me to reflash it. > Are you using a usb hub? Nope. > The cable came with the nanonote? or someone you can rely on? Yes. > Can you try in other port, i have a error similar to that before and > solved that way I tried that. Unfortunately, it gave the same error. Thanks * Cristian Paul Pe?aranda Rojas ([email protected]) wrote: > > Does anyone know what "Error - can't retrieve XBurst CPU information: > > -6" means? I plugged in my Nanonote booted in usbboot mode, attempted to > > reflash it using reflash_ben.sh, and got this message. > > Do you entered in usbboot mode right? > (power + u) > > lsusb output will now show a line with 601a:4740, so you can try after > that > > Are you using a usb hub? > > The cable came with the nanonote? or someone you can rely on? > > Can you try in other port, i have a error similar to that before and > solved that way > > regards > > Paul > _______________________________________________ > Qi Hardware Discussion List > Mail to list (members only): [email protected] > Subscribe or Unsubscribe: > http://lists.en.qi-hardware.com/mailman/listinfo/discussion _______________________________________________ Qi Hardware Discussion List Mail to list (members only): [email protected] Subscribe or Unsubscribe: http://lists.en.qi-hardware.com/mailman/listinfo/discussion
