Yes, please make sure they are assigned correctly. If they are let me know and I'll dive into the code.
Scott On 10/5/05, Dan Swartzendruber <[EMAIL PROTECTED]> wrote: > > if you did create the vlans, you don't seem to have assigned them as > interfaces. e.g. when you are in the console menu and see option #1 > (assign interfaces), you want to assign vlan0 and/or vlan1 as LAN, or > OPT or whatever. as is, you have the IP addresses assigned to the > real interfaces. > > At 04:47 PM 10/5/2005, you wrote: > ># ifconfig -a > >tl0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500 > > ether 00:80:5f:a7:83:4d > > media: Ethernet autoselect (none) > > status: no carrier > >tl1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500 > > ether 00:80:5f:a7:83:cd > > media: Ethernet autoselect (none) > > status: no carrier > >fxp0: flags=9943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,LINK0,MULTICAST> mtu > >1500 > > options=8<VLAN_MTU> > > inet6 fe80::250:8bff:fe68:8972%fxp0 prefixlen 64 scopeid 0x3 > > inet 82.4.0.0 netmask 0xffffff00 broadcast 255.255.255.255 > > ether 00:50:8b:68:89:72 > > media: Ethernet autoselect (100baseTX <full-duplex>) > > status: active > >fxp1: flags=9843<UP,BROADCAST,RUNNING,SIMPLEX,LINK0,MULTICAST> mtu 1500 > > options=8<VLAN_MTU> > > inet 172.100.100.254 netmask 0xffffff00 broadcast 172.100.100.255 > > inet6 fe80::250:8bff:fe68:8973%fxp1 prefixlen 64 scopeid 0x4 > > ether 00:50:8b:68:89:73 > > media: Ethernet autoselect (100baseTX <full-duplex>) > > status: active > >fxp2: flags=9843<UP,BROADCAST,RUNNING,SIMPLEX,LINK0,MULTICAST> mtu 1500 > > options=8<VLAN_MTU> > > inet 192.168.199.254 netmask 0xffffff00 broadcast 192.168.199.255 > > inet6 fe80::208:2ff:fede:cec4%fxp2 prefixlen 64 scopeid 0x5 > > ether 00:08:02:de:ce:c4 > > media: Ethernet autoselect (100baseTX) > > status: active > >fxp3: flags=9843<UP,BROADCAST,RUNNING,SIMPLEX,LINK0,MULTICAST> mtu 1500 > > options=8<VLAN_MTU> > > inet 192.168.200.254 netmask 0xffffff00 broadcast 192.168.200.255 > > inet6 fe80::208:2ff:fede:cec5%fxp3 prefixlen 64 scopeid 0x6 > > ether 00:08:02:de:ce:c5 > > media: Ethernet autoselect (100baseTX <full-duplex>) > > status: active > >plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500 > >lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 > > inet 127.0.0.1 netmask 0xff000000 > > inet6 ::1 prefixlen 128 > > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x8 > >pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33208 > >pfsync0: flags=41<UP,RUNNING> mtu 2020 > > pfsync: syncdev: lo0 maxupd: 128 > ># > > > > > >Hi Dan, > >ifconfig -a. > > > >Any idea what plip0 is ? > > > >Thanks > > > >-- > >GMX DSL = Maximale Leistung zum minimalen Preis! > >2000 MB nur 2,99, Flatrate ab 4,99 Euro/Monat: http://www.gmx.net/de/go/dsl > > >