I just have been reading about an oil additive called ZDDP which seems to be a desirable anti wear zinc compound for our type of motors. It wrecks catalytic converters and has become less useful in modern motors so is being reduced in modern auto oils. I'm think of switching to an aero oil (possibly shell http://www.shell.com/home/content/aviation/products/lubricants/piston_engine_oils/ ) Has anyone got any recommendations? Rob
PO Box 129, Lawson, NSW, 2783. mobile 0429 493828 ............................................. --- On Thu, 29/9/11, Rob Thompson <[email protected]> wrote: From: Rob Thompson <[email protected]> Subject: [DOG mailing list] oils To: [email protected] Received: Thursday, 29 September, 2011, 10:42 AM Here is an interesting article on oil by the Rotax people. I am wondering about using motorcycle oils if they are OK with avgas. http://www.rotax-owner.com/rotax-blog/item/8-oils-a-fluid-discussion Rob PO Box 129, Lawson, NSW, 2783. mobile 0429 493828 ............................................. --- On Tue, 20/9/11, Tom Preisser <[email protected]> wrote: From: Tom Preisser <[email protected]> Subject: Re: [DOG mailing list] Dimona Aileron question To: "[email protected]" <[email protected]> Received: Tuesday, 20 September, 2011, 8:58 PM Problems ?? I had a quick look at 3506's right wing yesterday and saw one crooked fine crack approximately 20mm long. Should I be more alarmed than usual ?? Cheers, Tom On Sep 19, 2011, at 6:21, "Ian Williams" <[email protected]> wrote: Hi Of interest, have any of you had a problem with cracking on the 90 degree corner just behind the aileron hinge ?? Where the hinge mounting plate attaches to the top skin ?? Best regards Ian WilliamsDruryNZ.
