Thank you for the prompt response. I'll go to the local hydraulic shop tomorrow-Monday. Kurt
On Fri, Dec 4, 2020 at 10:04 PM Rob Thompson <[email protected]> wrote: > If you can't get the O-rings as Cath suggested and you have to buy a new > one..... > > I can't recall if they are a metric thread or NPT ( > https://www.aircraftspruce.com/menus/ap/fuel_drainvalves.html) I think > the latter. > > Take it to a Hydraulic shop and ask them to identify the thread for you. > > Use teflon tape or very carefully with thread sealant when you re-assemble > > regards > Rob > > Rob Thompson > 0429 493 828 > > > > On Sat, Dec 5, 2020 at 1:51 PM Kurt Redinbaugh <[email protected]> > wrote: > >> The fuel drain on the underside of #3660 is weeping. Does anyone have >> experience with replacing the drain valve as regards either manufacturers >> part number or the specification of thread size for a replacement? Are >> there any surprises when I go to remove the existing valve and install the >> new one? >> Many thanks >> Kurt >> >
