Cleveland 30-9 https://www.aircraftspruce.com/catalog/lgpages/30-9.php?clickkey=12956
regards Rob Rob Thompson 0429 493 828 On Mon, Jan 4, 2021 at 11:18 AM Kurt Redinbaugh <redinbau...@gmail.com> wrote: > Thank you for the information. > Does anyone know the model of the caliper so that I might find a rebuild > kit? > Many thanks > Kurt > > On Thu, Dec 31, 2020 at 4:44 PM Rob Thompson <amessageto...@gmail.com> > wrote: > >> You can lift one wing and raise the wheel. Easier if you have a second >> person pushing down on the other wing. Support with a stand. >> Rob >> >> On Fri, 1 Jan 2021 11:18 am Kurt Redinbaugh <redinbau...@gmail.com> >> wrote: >> >>> As a follow-up I finally was able to remove the fuel drain. It is marked >>> Curtis 1550. I have ordered two from SKY GEEK at about $17 each. >>> Now in the meantime I am trying to figure out the process for jacking up >>> and removing the wheel and brake assembly so I can resolve a leaking >>> caliper. >>> Kurt >>> >>> ---------- Forwarded message --------- >>> From: Kurt Redinbaugh <redinbau...@gmail.com> >>> Date: Fri, Dec 4, 2020 at 6:50 PM >>> Subject: Fuel Drain >>> To: <dog@lists.riverland.net.au> >>> >>> >>> The fuel drain on the underside of #3660 is weeping. Does anyone have >>> experience with replacing the drain valve as regards either manufacturers >>> part number or the specification of thread size for a replacement? Are >>> there any surprises when I go to remove the existing valve and install the >>> new one? >>> Many thanks >>> Kurt >>> >>