Thank you for the information. Does anyone know the model of the caliper so that I might find a rebuild kit? Many thanks Kurt
On Thu, Dec 31, 2020 at 4:44 PM Rob Thompson <[email protected]> wrote: > You can lift one wing and raise the wheel. Easier if you have a second > person pushing down on the other wing. Support with a stand. > Rob > > On Fri, 1 Jan 2021 11:18 am Kurt Redinbaugh <[email protected]> wrote: > >> As a follow-up I finally was able to remove the fuel drain. It is marked >> Curtis 1550. I have ordered two from SKY GEEK at about $17 each. >> Now in the meantime I am trying to figure out the process for jacking up >> and removing the wheel and brake assembly so I can resolve a leaking >> caliper. >> Kurt >> >> ---------- Forwarded message --------- >> From: Kurt Redinbaugh <[email protected]> >> Date: Fri, Dec 4, 2020 at 6:50 PM >> Subject: Fuel Drain >> To: <[email protected]> >> >> >> The fuel drain on the underside of #3660 is weeping. Does anyone have >> experience with replacing the drain valve as regards either manufacturers >> part number or the specification of thread size for a replacement? Are >> there any surprises when I go to remove the existing valve and install the >> new one? >> Many thanks >> Kurt >> >
