I wen the hacky route and put together some fan guards, a 12v fan, and a carbon filter. I have no idea of the effectiveness, but it does get it away from my nose. and mouth.
On Mon, Dec 1, 2014 at 9:52 AM, Erik Walthinsen <[email protected]> wrote: > On 12/01/2014 08:08 AM, Mr Yum wrote: > >> Guess you you re-purpose your clothes dryer vent hose ;) >> > > That's what I did for my computer... reversed all the fans so the airflow > went out the back, then used a short length to connect the back fan to my > attic. Take a one-way flapper valve, remove the flapper and one end of the > tube, and you have something that perfectly fits (screw holes and all) onto > a 120mm fan. A quick-disconnect fitting on the wall to the attic makes it > trivial to remove the computer from its location. > > That plus a ginormous passive CPU heatsink (which is right up against the > relevant rear case fan) solved both the waste heat and noise problems I had. > > As for fume removal, one of these days I'm going to get that solved with > the same basic approach, although that will go through to the outside > rather than the attic. Main thing I haven't figured out yet is the best > way to build a fume hood for the toaster itself. > > _______________________________________________ > dorkbotpdx-blabber mailing list > [email protected] > http://music.columbia.edu/mailman/listinfo/dorkbotpdx-blabber >
_______________________________________________ dorkbotpdx-blabber mailing list [email protected] http://music.columbia.edu/mailman/listinfo/dorkbotpdx-blabber
