Terry,
I am going to leave this for someone else to address. I am sorry you have had problems. You will get a good answer from some of the guys that know something about this, as I don't. 73, Jim NW5F Hi Jim! The central 'spinners' (inserts) for the standard R-4B knob have a raised edge to them, (hence 'dished'), unlike those of the (I think) R-4C and the Collins 'S' line series, which are dead flat.. Replacement spinners for those are available, and I have used them on my KWM-2A, etc . So many of the Drake 4 series seem to have scratched inserts and it would be nice to be able to complete a restoration by replacing them. I'd have thought there would be suffcient demand for someone to tool up and manufacture replacements, if these are not othewise available. I hope you are having fun with your Drake gear. I am focussing on the 'B' line. Many years ago I ordered a 4B via an English company, and it was a darned long time coming. When it did eventually arrive it was an early production 4C! Basically a excellent receiver, but quite a shock to discover that I needed to purchase additional filters, etc. I never did, as my main interest back then was two meter SSB (I was living at my parents' place and had lost my HF antenna!) and I used the 4C as the heart of a solid state 2m SSB transverter/transceiver home brew set up. So I guess my new interest in the 4B line is pure nostalgia! All the best, Terry G3VFO ps 4B spinners/inserts, anyone....? ----- Original Message ----- From: James B Davis <mailto:[EMAIL PROTECTED]> To: [EMAIL PROTECTED] Sent: Wednesday, October 17, 2007 1:14 PM Subject: RE: [drakelist] Tuning Knobs Terry, Top of the morning to you. I have never seen any "Dished" spinners for the Drake equipment. There may be something like that but I would almost bet it came from another brand of equipment as a substitute for the normal knobs. Jim/NW5F Re Jim's request, and in a similar vein, does anyone know of an actual or potential source of the 'dished' tuning knob aluminium spinners for the 4B series? The flat spinners appear to be available , but I have not yet found a source of the 'dished' ones. Cheers, Terry G3VFO ----- Original Message ----- From: James B Davis <mailto:[EMAIL PROTECTED]> To: [EMAIL PROTECTED] Sent: Wednesday, October 17, 2007 2:17 AM Subject: [drakelist] Tuning Knobs Every one of ye, Does anyone have idle (Not being used, extras) tuning knobs with spun aluminum insert and no finger tuner button with a plain skirt, no numbers on it. Need two of them. Jim/NW5F JBDVintageCollector Jim Davis, NW5F "Today is a GOOD day to have a GREAT day!" - Bill Fowler This email was scanned with AVG Anti-Virus Protection.
<<image001.jpg>>
<<image002.jpg>>
