OK thanks Gary. I thought it might be the diodes. I have 9 mhz signal going
in and nothing coming out of T14. It looks a little tricky getting T14 out but
I think that is the next step. I'll let you know what I find after I get it
open. I better order some diodes!
Terry
In a message dated 3/22/2008 11:54:24 A.M. Eastern Daylight Time,
[EMAIL PROTECTED] writes:
Garey Barrell <[EMAIL PROTECTED]> made an utterance to the drakelist gang
----------------------------------------------------------------------
You can open up the can and replace the diodes. The originals are
Germanium and can be replaced with 1N541s (if you can find them,
unlikely) or with 1N5711 or other Schottky diodes. You may find when
you open it up that the diodes are ok, but have managed to short to the can.
73, Garey - K4OAH
Glen Allen, VA
Drake 2-B, 4-B, C-Line & TR-4/C Service Supplement CDs
<www.k4oah.com>
[EMAIL PROTECTED] wrote:
> I have a TR-4C that is losing the 9 mhz signal in T14. I assume the
> diodes are out. Is this repairable or is the thing junk?
> Terry, W8NJR
>
>
>
----------------------------------------------------------------------
Submissions: [EMAIL PROTECTED]
Unsubscribe: [EMAIL PROTECTED] - unsubscribe drakelist in body
Hopelessly Lost: [EMAIL PROTECTED] - help in body of message
Zerobeat Web Page: www.zerobeat.net - sponsored by www.tlchost.net
----------------------------------------------------------------------
**************Create a Home Theater Like the Pros. Watch the video on AOL
Home.
(http://home.aol.com/diy/home-improvement-eric-stromer?video=15?ncid=aolhom00030000000001)
