[EMAIL PROTECTED] made an utterance to the drakelist gang
----------------------------------------------------------------------
I would use Simple Green (which I know you've already tried) and/or
Oxyclean which is a stain lifter but will remove many things. Of course
there are other things you can try like the cleaner for Mag wheels, but any
of them are going to leave a residue if not washed off.

My friends at the old Hewlett Packard Metrology Lab in Fullerton, CA used
the following to clean equipment for service;

1. Using an air hose, blow out dirt and dust from the chassis.
2. Hose the equipment down with simple green, letting it set for a while.
This removes any grease, grime, goo.
3. Then using a pressure sprayer, wash off the chassis with distilled
water.
4. Blow the water out with an air hose.
5. The last step was to bake the chassis using an oven at about  180-200
degrees for a couple of days to ensure all the water was out.

I've actually done this myself on a computer monitor I spilled 30 SAE oil
in, I used my wife's oven and it worked. I once dropped a Cellphone in the
toilet, I washed it out under the sink, blew it out and then baked it over
night. Guess what, no problems (I could say the audio was stinky but..),
worked great!

Just my two cents,

John N. Hudson III, WA6HYQ




                                                                           
             Bill Ellis                                                    
             <[EMAIL PROTECTED]                                             
             >                                                          To 
             Sent by:                  [email protected]              
             [EMAIL PROTECTED]                                          cc 
             erobeat.net                                                   
                                                                   Subject 
                                       [drakelist] Cleaning Drake copper   
             07/19/2008 03:44          chassis                             
             PM                                                            
                                                                           
                                                                           
             Please respond to                                             
             [EMAIL PROTECTED]                                             
                   t.net                                                   
                                                                           
                                                                           




                                                                            
    Has anyone used Cameo brand copper cleaner to clean a Drake chassis. It 
    is usually available in a grocery store. I have a couple that have a    
    caked on dirty crust. I'm wondering if this stuff might be too strong.  
                                                                            
    Thanks,                                                                 
                                                                            
    Bill Ellis, WB9CAC                                                      
                                                                            
                                                                            





----------------------------------------------------------------------
Submissions:        [email protected]
Unsubscribe:        [EMAIL PROTECTED] - unsubscribe drakelist in body
Hopelessly Lost:    [EMAIL PROTECTED] - help in body of message
Zerobeat Web Page:  www.zerobeat.net - sponsored by www.tlchost.net
----------------------------------------------------------------------

Reply via email to