Hunter -
Confirm when you key the transmitter you get idle current, (70 mA,) then
you adjust the RF TUNE for 'brief' drive, then current goes to ZERO, or
back to IDLE current.
73, Garey - K4OAH
Glen Allen, VA
Drake 2-B, 2-C/2-NT, 4-B, C-Line&
TR-4/C Service Supplement CDs
<www.k4oah.com>
Hunter Ellington wrote:
First the confession. I am soooo stupid. I went to turn on my T-X4C
and accidentally turned the function knob one position too far putting
it in tune. I left the room for about 30 minutes and came back to
find the transmitter in tune. An antenna was connected. I shut down
the rig and let it cool down. Now, when I try to tune the rig, I get
drive when I adjust the RF tune for a second and then it drops to
zero. If I wait for minute, and go to tune the same thing happens.
What have I done? I switched out the driver and put in two new
finals, but to no avail. What next?
K0GFY R. Hunter Ellington
303-454-0543/720-560-8139
P.O. Box 44
Larkspur, CO 80118
_______________________________________________
Drakelist mailing list
[email protected]
http://mailman.zerobeat.net/mailman/listinfo/drakelist
