Jim -
The Drake relays (P&B / TYCO R10-E1-Y4-V2.5) are rated for 2A, 3A max at
155 VAC (220V peak). Insulation / contact breakdown is 1 kV. Contacts
are rated 3 x 10^4 operations at 2A. The mechanics are rated for 100
Million operations!
Should have no problem at all handling the 170V at low current used in
the 30L-1.
73, Garey - K4OAH
Glen Allen, VA
Drake 2-B, 2-C/2-NT, 4-B, C-Line&
TR-4/C Service Supplement CDs
<www.k4oah.com>
[email protected] wrote:
Greetings Gentlemen,
Does anyone have any thoughts on keying a Collins 30L1 with a Drake t4XC ?
The keyline voltage on the amp is 170v ....don’t know what current it
might
draw but can measure that if I buy the amp.
Does anyone know if the Drake TR relay can safely handle this or if it is
best to build an interface ? Never hurts to get opinions from those who
might have pondered or tried this. thanks Jim N5KY
_______________________________________________
Drakelist mailing list
[email protected]
http://mailman.zerobeat.net/mailman/listinfo/drakelist
