----- Original Message -----
From: "Donley" <donley...@comcast.net>
To: <k4...@mindspring.com>; "drakelist"
<Drakelist@zerobeat.net>
Sent: Tuesday, July 12, 2011 4:25 PM
Subject: Re: [Drakelist] TR-4C Bias Adjustment
Another thought, If the meter switch is stuck reading
output rather than plate current its likely the adjusting
pot will work, that's the knob that you pull out to switch
the meter. Get a reading on the meter and rotate this
control. If you are actually reading plate current it will
make no difference, but if you are reading output it will
run the meter up and down.
--
Richard Knoppow
Los Angeles
WB6KBL
dickb...@ix.netcom.com
_______________________________________________
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist