Nord is a Qualcomm SoC with a DP-only display subsystem
(MDSS 12.1 / DPU 1499A) and two independent DP controllers
backed by eDP PHY.  The PHY uses a different register layout,
PLL/SSC coefficients and TX signal parameters compared to
all existing SoCs supported by the qcom-edp driver.

This series enables the display pipeline on Nord by adding
DT bindings for the MDSS, DP controller and eDP PHY, DPU
catalog and driver entries for MDSS and DP, and full eDP
PHY support.

Tested on Nord Ride SX board with one DPU. Both MDSS and
DP controllers probe cleanly and panels render correctly.

Signed-off-by: Ritesh Kumar <[email protected]>
Signed-off-by: Mahadevan P <[email protected]>
Signed-off-by: Nabige Aala <[email protected]>
---
Changes in v2:
- Reduced the PHY patches from 11 to 7. (Dmitry) 
- Removed redundent comments. (Dmitry)
- Addressed review feedback from v1. 
- Link to v1: 
https://patch.msgid.link/[email protected]

To: Vinod Koul <[email protected]>
To: Neil Armstrong <[email protected]>
To: Manivannan Sadhasivam <[email protected]>
To: Rob Herring <[email protected]>
To: Krzysztof Kozlowski <[email protected]>
To: Conor Dooley <[email protected]>
To: Bjorn Andersson <[email protected]>
To: Rob Clark <[email protected]>
To: Dmitry Baryshkov <[email protected]>
To: Abhinav Kumar <[email protected]>
To: Jessica Zhang <[email protected]>
To: Sean Paul <[email protected]>
To: Marijn Suijten <[email protected]>
To: Maarten Lankhorst <[email protected]>
To: Maxime Ripard <[email protected]>
To: Thomas Zimmermann <[email protected]>
To: David Airlie <[email protected]>
To: Simona Vetter <[email protected]>
To: Kuogee Hsieh <[email protected]>
To: Mahadevan P <[email protected]>
To: Shawn Guo <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]

---
Mahadevan P (6):
      dt-bindings: phy: qcom,edp-phy: Add DP PHY compatible for Nord
      dt-bindings: display: msm: Document the Nord DiplayPort controller
      dt-bindings: display/msm: Document Nord MDSS
      drm/msm/dpu: Add support for DPU 12.1 on Nord
      drm/msm: mdss: Add support for MDSS on Nord
      drm/msm/dp: Add support for DP controllers on Nord

Ritesh Kumar (7):
      phy: qcom: edp: Add Nord-specific register offsets
      phy: qcom: edp: Generalize power-on path for per-SoC overrides
      phy: qcom: edp: Add Nord voltage-swing and pre-emphasis tables
      phy: qcom: edp: Add Nord spread-spectrum clocking configuration callback
      phy: qcom: edp: Add Nord PLL configuration callback
      phy: qcom: edp: Add Nord PHY configuration data tables
      phy: qcom: edp: Add Nord phy_cfg, ops and OF compatible

 .../bindings/display/msm/dp-controller.yaml        |   3 +
 .../bindings/display/msm/qcom,nord-mdss.yaml       | 396 +++++++++++++++
 .../devicetree/bindings/phy/qcom,edp-phy.yaml      |   2 +
 .../gpu/drm/msm/disp/dpu1/catalog/dpu_12_1_nord.h  | 544 +++++++++++++++++++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c     |   1 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h     |   1 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c  |  20 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h  |   2 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h        |   2 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c            |   1 +
 drivers/gpu/drm/msm/dp/dp_display.c                |   9 +
 drivers/gpu/drm/msm/msm_mdss.c                     |   1 +
 drivers/phy/qualcomm/phy-qcom-edp.c                | 350 ++++++++++++-
 .../phy/qualcomm/phy-qcom-qmp-qserdes-dp-com-v8.h  |   3 +
 14 files changed, 1319 insertions(+), 16 deletions(-)
---
base-commit: 693de981a44b0e7e3b6a73f0b0bcbae9c8d068e6
change-id: 20260911-nord-drv-dt-d09b21f37ae9

Best regards,
--  
Nabige Aala <[email protected]>

Reply via email to