Could somebody please help me? I have compiled the latest mach64-0-0-2-branch from cvs, and I can not get direct rendering to load.
The latest dri kernel modules install properly, and so does the agpgart kernel module. My video card reports that bus mastering is enabled. And I have activated MTRR in the kernel. I am running Redhat 7.1 on a Dell Inspiron 7500 Pentium III 500 with 128 MB SDRAM. Kernel version 2.4.5 with patches for Win4Lin. My video card is an ATI Rage Mobility P/M with 8mb SGRAM, which is a Mach64 based card. I will print what information I have below. Sorry if it seems a bit excessive. Any help anybody can give me would be much appreciated. Below is the output from starting the DRI X server: This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to [EMAIL PROTECTED] and patches submitted to [EMAIL PROTECTED] Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs) XFree86 Version 4.1.99.1 (DRI mach64 branch) / X Window System (protocol Version 11, revision 0, vendor release 6510) Release Date: 20 August 2001 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/FAQ) Build Operating System: Linux 2.4.5-win4lin i686 [ELF] Module Loader present (==) Log file: "/var/log/XFree86.0.log", Time: Mon Oct 29 13:49:07 2001 (++) Using config file: "XF86Config" Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) ServerLayout "XFree86 Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Card0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) FontPath set to "/usr/X11R6-DRI/lib/X11/fonts/misc/,/usr/X11R6-DRI/lib/X11/fonts/Speedo/,/usr/X11R6-DRI/lib/X11/fonts/Type1/,/usr/X11R6-DRI/lib/X11/fonts/CID/,/usr/X11R6-DRI/lib/X11/fonts/75dpi/,/usr/X11R6-DRI/lib/X11/fonts/100dpi/" (**) RgbPath set to "/usr/X11R6-DRI/lib/X11/rgb" (**) ModulePath set to "/usr/X11R6-DRI/lib/modules" (--) using VT number 7 (II) Loading /usr/X11R6-DRI/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) Loading /usr/X11R6-DRI/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.1.0, module version = 0.1.0 (II) Loading /usr/X11R6-DRI/lib/modules/libscanpci.a (II) Module scanpci: vendor="The XFree86 Project" compiled for 4.1.0, module version = 0.1.0 (II) Unloading /usr/X11R6-DRI/lib/modules/libscanpci.a (--) PCI:*(1:0:0) ATI Mach64 LM rev 100, Mem @ 0xfd000000/24, 0xfc000000/12, I/O @ 0x2000/8 (II) Loading /usr/X11R6-DRI/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) Loading /usr/X11R6-DRI/lib/modules/extensions/libdri.a (II) Module dri: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) Loading /usr/X11R6-DRI/lib/modules/linux/libdrm.a (II) Module drm: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) Loading /usr/X11R6-DRI/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) Loading /usr/X11R6-DRI/lib/modules/extensions/libglx.a (II) Module glx: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) Loading /usr/X11R6-DRI/lib/modules/extensions/libGLcore.a (II) Module GLcore: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) Loading /usr/X11R6-DRI/lib/modules/extensions/libpex5.a (II) Module pex5: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) Loading /usr/X11R6-DRI/lib/modules/extensions/librecord.a (II) Module record: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.13.0 (II) Loading /usr/X11R6-DRI/lib/modules/extensions/libxie.a (II) Module xie: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) Loading /usr/X11R6-DRI/lib/modules/fonts/libspeedo.a (II) Module speedo: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) Loading /usr/X11R6-DRI/lib/modules/fonts/libtype1.a (II) Module type1: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) Loading /usr/X11R6-DRI/lib/modules/drivers/ati_drv.o (II) Module ati: vendor="The XFree86 Project" compiled for 4.1.0, module version = 6.3.6 (II) Loading /usr/X11R6-DRI/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) ATI: ATI driver (version 6.3.6) for chipsets: ati, ativga (II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI), ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI), ATI Rage 128 RL (AGP), ATI Rage 128 Pro PD (PCI), ATI Rage 128 Pro PF (AGP), ATI Rage 128 Mobility LE (PCI), ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP), ATI Rage 128 Mobility ML (AGP) (II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP), ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP), ATI Radeon VE (AGP) (II) Loading /usr/X11R6-DRI/lib/modules/drivers/atimisc_drv.o (II) Module atimisc: vendor="The XFree86 Project" compiled for 4.1.0, module version = 6.3.6 (==) ATI(0): Chipset: "ati". (**) ATI(0): Depth 16, (--) framebuffer bpp 16 (II) Loading /usr/X11R6-DRI/lib/modules/linux/libint10.a (II) Module int10: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) ATI(0): Primary V_BIOS segment is: 0xc000 (II) Loading /usr/X11R6-DRI/lib/modules/libddc.a (II) Module ddc: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) Loading /usr/X11R6-DRI/lib/modules/libvbe.a (II) Module vbe: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) ATI(0): VESA BIOS detected (II) ATI(0): VESA VBE DDC supported (--) ATI(0): ATI 3D Rage Mobility graphics controller detected. (--) ATI(0): Chip type 4C4D "LM", version 4, foundry TSMC, class 0, revision 0x01. (--) ATI(0): AGP bus interface detected; block I/O base is 0x2000. (--) ATI(0): ATI Mach64 adapter detected. (--) ATI(0): Internal RAMDAC (subtype 1) detected. (==) ATI(0): RGB weight 565 (==) ATI(0): Default visual is TrueColor (==) ATI(0): Using gamma correction (1.0, 1.0, 1.0) (II) ATI(0): Using Mach64 accelerator CRTC. (--) ATI(0): 1024x768 panel (ID 4) detected. (--) ATI(0): Panel model Hitachi TX38D73VC1CAC. (--) ATI(0): Panel clock is 65.146 MHz. (II) ATI(0): Using digital flat panel interface. (II) ATI(0): Storing hardware cursor image at 0xFD7FFC00. (II) ATI(0): Using 8 MB linear aperture at 0xFD000000. (!!) ATI(0): Virtual resolutions will be limited to 8191 kB due to linear aperture size and/or placement of hardware cursor image area. (II) ATI(0): Using Block 0 MMIO aperture at 0xFC000400. (II) ATI(0): Using Block 1 MMIO aperture at 0xFC000000. (==) ATI(0): Write-combining range (0xfd000000,0x800000) (II) ATI(0): MMIO write caching enabled. (--) ATI(0): 8192 kB of SGRAM (1:1) detected (using 8191 kB). (WW) ATI(0): Cannot shadow an accelerated frame buffer. (--) ATI(0): Internal programmable clock generator detected. (--) ATI(0): Reference clock 29.500 MHz. (II) ATI(0): Maximum clock: 230.00 MHz (II) ATI(0): Not using default mode "1152x864" (exceeds panel dimensions) (II) ATI(0): Not using default mode "1280x960" (exceeds panel dimensions) (II) ATI(0): Not using default mode "1280x960" (exceeds panel dimensions) (II) ATI(0): Not using default mode "1280x1024" (exceeds panel dimensions) (II) ATI(0): Not using default mode "1280x1024" (exceeds panel dimensions) (II) ATI(0): Not using default mode "1280x1024" (exceeds panel dimensions) (II) ATI(0): Not using default mode "1600x1200" (exceeds panel dimensions) (II) ATI(0): Not using default mode "1600x1200" (exceeds panel dimensions) (II) ATI(0): Not using default mode "1600x1200" (exceeds panel dimensions) (II) ATI(0): Not using default mode "1600x1200" (exceeds panel dimensions) (II) ATI(0): Not using default mode "1600x1200" (exceeds panel dimensions) (II) ATI(0): Not using default mode "1792x1344" (exceeds panel dimensions) (II) ATI(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan) (II) ATI(0): Not using default mode "1856x1392" (exceeds panel dimensions) (II) ATI(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan) (II) ATI(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan) (II) ATI(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan) (II) ATI(0): Not using default mode "1400x1050" (exceeds panel dimensions) (II) ATI(0): Not using default mode "1400x1050" (exceeds panel dimensions) (II) ATI(0): Not using default mode "1600x1024" (exceeds panel dimensions) (--) ATI(0): Virtual size is 1024x768 (pitch 1024) (**) ATI(0): Default mode "1024x768": 65.1 MHz, 49.7 kHz, 62.7 Hz (==) ATI(0): DPI set to (75, 75) (II) Loading /usr/X11R6-DRI/lib/modules/libxaa.a (II) Module xaa: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) Loading /usr/X11R6-DRI/lib/modules/libramdac.a (II) Module ramdac: vendor="The XFree86 Project" compiled for 4.1.0, module version = 0.1.0 (II) Loading /usr/X11R6-DRI/lib/modules/libfb.a (II) Module fb: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (==) ATI(0): Write-combining range (0xfd000000,0x800000) (II) ATI(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Indirect CPU to Screen color expansion Solid Lines Offscreen Pixmaps Setting up tile and stipple cache: 32 128x128 slots 18 256x256 slots 6 512x512 slots (==) ATI(0): Backing store disabled (==) ATI(0): Silken mouse enabled (**) Mouse0: Protocol: "PS/2" (**) Mouse0: Core Pointer (==) Mouse0: Buttons: 3 (II) Keyboard "Keyboard0" handled by legacy driver (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) Couldn't load XKB keymap, falling back to pre-XKB keymap Eterm: Error: unexpected argument 80x40+0+0 -- expected option Eterm: Error: Attempting to continue, but strange things may happen. X connection to :0.0 broken (explicit kill or server shutdown). Below is the output from glxinfo: name of display: :0.0 display: :0 screen: 0 direct rendering: No server glx vendor string: SGI server glx version string: 1.2 server glx extensions: GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context client glx vendor string: SGI client glx version string: 1.2 client glx extensions: GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context GLX extensions: GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context OpenGL vendor string: VA Linux Systems, Inc. OpenGL renderer string: Mesa GLX Indirect OpenGL version string: 1.2 Mesa 3.4.2 OpenGL extensions: GL_ARB_multitexture, GL_EXT_abgr, GL_EXT_blend_color, GL_EXT_blend_minmax, GL_EXT_blend_subtract glu version: 1.1 Mesa 3.4.1 glu extensions: GL_EXT_abgr visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat ---------------------------------------------------------------------- 0x23 16 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None 0x24 16 tc 0 16 0 r y . 5 6 5 0 0 16 8 16 16 16 0 0 0 None 0x25 16 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None 0x26 16 dc 0 16 0 r y . 5 6 5 0 0 16 8 16 16 16 0 0 0 None Below is the output from xdpyinfo: name of display: :0.0 version number: 11.0 vendor string: The XFree86 Project, Inc vendor release number: 40199001 XFree86 version: 4.1.99.1 maximum request size: 4194300 bytes motion buffer size: 256 bitmap unit, bit order, padding: 32, LSBFirst, 32 image byte order: LSBFirst number of supported pixmap formats: 7 supported pixmap formats: depth 1, bits_per_pixel 1, scanline_pad 32 depth 4, bits_per_pixel 8, scanline_pad 32 depth 8, bits_per_pixel 8, scanline_pad 32 depth 15, bits_per_pixel 16, scanline_pad 32 depth 16, bits_per_pixel 16, scanline_pad 32 depth 24, bits_per_pixel 32, scanline_pad 32 depth 32, bits_per_pixel 32, scanline_pad 32 keycode range: minimum 8, maximum 255 focus: window 0x200041, revert to PointerRoot number of extensions: 29 BIG-REQUESTS DOUBLE-BUFFER DPMS Extended-Visual-Information FontCache GLX LBX MIT-SCREEN-SAVER MIT-SHM MIT-SUNDRY-NONSTANDARD RECORD RENDER SECURITY SGI-GLX SHAPE SYNC TOG-CUP X3D-PEX XC-APPGROUP XC-MISC XFree86-Bigfont XFree86-DGA XFree86-Misc XFree86-VidModeExtension XIE XInputExtension XKEYBOARD XTEST XVideo default screen number: 0 number of screens: 1 screen #0: dimensions: 1024x768 pixels (347x260 millimeters) resolution: 75x75 dots per inch depths (7): 16, 1, 4, 8, 15, 24, 32 root window id: 0x3b depth of root window: 16 planes number of colormaps: minimum 1, maximum 1 default colormap: 0x20 default number of colormap cells: 64 preallocated pixels: black 0, white 65535 options: backing-store NO, save-unders NO largest cursor: 64x64 current input event mask: 0x58207f KeyPressMask KeyReleaseMask ButtonPressMask ButtonReleaseMask EnterWindowMask LeaveWindowMask PointerMotionMask ButtonMotionMask SubstructureNotifyMask SubstructureRedirectMask PropertyChangeMask number of visuals: 4 default visual id: 0x23 visual: visual id: 0x23 class: TrueColor depth: 16 planes available colormap entries: 64 per subfield red, green, blue masks: 0xf800, 0x7e0, 0x1f significant bits in color specification: 6 bits visual: visual id: 0x24 class: TrueColor depth: 16 planes available colormap entries: 64 per subfield red, green, blue masks: 0xf800, 0x7e0, 0x1f significant bits in color specification: 6 bits visual: visual id: 0x25 class: DirectColor depth: 16 planes available colormap entries: 64 per subfield red, green, blue masks: 0xf800, 0x7e0, 0x1f significant bits in color specification: 6 bits visual: visual id: 0x26 class: DirectColor depth: 16 planes available colormap entries: 64 per subfield red, green, blue masks: 0xf800, 0x7e0, 0x1f significant bits in color specification: 6 bits Below is my XF86Config File: Section "ServerLayout" Identifier "XFree86 Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" RgbPath "/usr/X11R6-DRI/lib/X11/rgb" ModulePath "/usr/X11R6-DRI/lib/modules" FontPath "/usr/X11R6-DRI/lib/X11/fonts/misc/" FontPath "/usr/X11R6-DRI/lib/X11/fonts/Speedo/" FontPath "/usr/X11R6-DRI/lib/X11/fonts/Type1/" FontPath "/usr/X11R6-DRI/lib/X11/fonts/CID/" FontPath "/usr/X11R6-DRI/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6-DRI/lib/X11/fonts/100dpi/" EndSection Section "Module" Load "dbe" Load "dri" Load "extmod" Load "glx" Load "pex5" Load "record" Load "xie" Load "speedo" Load "type1" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "PS/2" Option "Device" "/dev/mouse" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" ### [arg]: arg optional #Option "ShadowFB" # [<bool>] Identifier "Card0" Driver "ati" VendorName "ATI" BoardName "Mach64 LM" BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultDepth 16 SubSection "Display" Depth 1 EndSubSection SubSection "Display" Depth 4 EndSubSection SubSection "Display" Depth 8 EndSubSection SubSection "Display" Depth 15 EndSubSection SubSection "Display" Depth 16 EndSubSection SubSection "Display" Depth 24 EndSubSection EndSection Section "DRI" Mode 0666 EndSection _______________________________________________ Dri-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/dri-devel
