I created X11R6-DRI, by copying my old X installation. I have not ran
make install, as it appears that I do not have to do so in the
compilation guide. If that is what I have to do, is it likley that it
won't affect my current X installation (Currently /usr/X11R6)?

Thanks

On Tue, 2001-10-30 at 16:07, Leif Delgass wrote:
> Could you describe how you did the build/installation in a bit more
> detail?  Did you copy anything into your /usr/X11R6-DRI tree from another
> installation or make changes to host.def?  Your ati_drv.o/atimisc_drv.o
> modules are saying "compiled for 4.1.0" instead of "compiled for
> 4.1.99.1".  You should see drm being loaded after the mtrrs are setup and 
> before the XAA init (which should only show tile/stipple cache since we 
> don't have 2D acceleration enabled yet).
> 
> --Leif
> 
> On 30 Oct 2001, Liam Wilks wrote:
> 
> > I am placing the mach64*.o modules under
> > /lib/modules/2.4.5-win4lin/kernel/drivers/char/drm. I do not think that
> > the kernel modules are a problem they seem to load fine.
> > 
> > Liam Wilks
> > 
> > On Tue, 2001-10-30 at 15:53, Carl Busjahn wrote:
> > > Where are you placing the mach64*.o modules?
> > > You should be putting them somewhere under your kernel module directory 
> > > (/lib/modules/2.4.5*)  The mach64 modules are not built automatically by 
> > > the DRI make World command.  To compile these modules, cd to 
> > > DRI-SOURCE/xc/xc/programs/Xserver/hw/xfree86/os-support/linux/drm/kernel/ 
> > >  then do gmake -f Makefile.linux  then just copy mach64*.o to your 
> > > kernel module directory (somewhere under there).
> > > 
> > > Liam Wilks wrote:
> > > 
> > > >Could somebody please help me? I have compiled the latest
> > > >mach64-0-0-2-branch from cvs, and I can not get direct rendering to
> > > >load. 
> > > >
> > > >The latest dri kernel modules install properly, and so does the agpgart
> > > >kernel module. My video card reports that bus mastering is enabled. And
> > > >I have activated MTRR in the kernel. 
> > > >
> > > >I am running Redhat 7.1 on a Dell Inspiron 7500 Pentium III 500 with 128
> > > >MB SDRAM. Kernel version 2.4.5 with patches for Win4Lin. My video card
> > > >is an ATI Rage Mobility P/M with 8mb SGRAM, which is a Mach64 based
> > > >card.
> > > >
> > > >I will print what information I have below. Sorry if it seems a bit
> > > >excessive.
> > > >
> > > >Any help anybody can give me would be much appreciated.
> > > >
> > > >Below is the output from starting the DRI X server: 
> > > >
> > > >This is a pre-release version of XFree86, and is not supported in any
> > > >way.  Bugs may be reported to [EMAIL PROTECTED] and patches submitted
> > > >to [EMAIL PROTECTED]  Before reporting bugs in pre-release versions,
> > > >please check the latest version in the XFree86 CVS repository
> > > >(http://www.XFree86.Org/cvs)
> > > >
> > > >XFree86 Version 4.1.99.1 (DRI mach64 branch) / X Window System
> > > >(protocol Version 11, revision 0, vendor release 6510)
> > > >Release Date: 20 August 2001
> > > > If the server is older than 6-12 months, or if your card is
> > > > newer than the above date, look for a newer version before
> > > > reporting problems.  (See http://www.XFree86.Org/FAQ)
> > > >Build Operating System: Linux 2.4.5-win4lin i686 [ELF] 
> > > >Module Loader present
> > > >(==) Log file: "/var/log/XFree86.0.log", Time: Mon Oct 29 13:49:07 2001
> > > >(++) Using config file: "XF86Config"
> > > >Markers: (--) probed, (**) from config file, (==) default setting,
> > > >         (++) from command line, (!!) notice, (II) informational,
> > > >         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> > > >(==) ServerLayout "XFree86 Configured"
> > > >(**) |-->Screen "Screen0" (0)
> > > >(**) |   |-->Monitor "Monitor0"
> > > >(**) |   |-->Device "Card0"
> > > >(**) |-->Input Device "Mouse0"
> > > >(**) |-->Input Device "Keyboard0"
> > > >(**) FontPath set to 
>"/usr/X11R6-DRI/lib/X11/fonts/misc/,/usr/X11R6-DRI/lib/X11/fonts/Speedo/,/usr/X11R6-DRI/lib/X11/fonts/Type1/,/usr/X11R6-DRI/lib/X11/fonts/CID/,/usr/X11R6-DRI/lib/X11/fonts/75dpi/,/usr/X11R6-DRI/lib/X11/fonts/100dpi/"
> > > >(**) RgbPath set to "/usr/X11R6-DRI/lib/X11/rgb"
> > > >(**) ModulePath set to "/usr/X11R6-DRI/lib/modules"
> > > >(--) using VT number 7
> > > >
> > > >(II) Loading /usr/X11R6-DRI/lib/modules/fonts/libbitmap.a
> > > >(II) Module bitmap: vendor="The XFree86 Project"
> > > > compiled for 4.1.0, module version = 1.0.0
> > > >(II) Loading /usr/X11R6-DRI/lib/modules/libpcidata.a
> > > >(II) Module pcidata: vendor="The XFree86 Project"
> > > > compiled for 4.1.0, module version = 0.1.0
> > > >(II) Loading /usr/X11R6-DRI/lib/modules/libscanpci.a
> > > >(II) Module scanpci: vendor="The XFree86 Project"
> > > > compiled for 4.1.0, module version = 0.1.0
> > > >(II) Unloading /usr/X11R6-DRI/lib/modules/libscanpci.a
> > > >(--) PCI:*(1:0:0) ATI Mach64 LM rev 100, Mem @ 0xfd000000/24, 0xfc000000/12, 
>I/O @ 0x2000/8
> > > >(II) Loading /usr/X11R6-DRI/lib/modules/extensions/libdbe.a
> > > >(II) Module dbe: vendor="The XFree86 Project"
> > > > compiled for 4.1.0, module version = 1.0.0
> > > >(II) Loading /usr/X11R6-DRI/lib/modules/extensions/libdri.a
> > > >(II) Module dri: vendor="The XFree86 Project"
> > > > compiled for 4.1.0, module version = 1.0.0
> > > >(II) Loading /usr/X11R6-DRI/lib/modules/linux/libdrm.a
> > > >(II) Module drm: vendor="The XFree86 Project"
> > > > compiled for 4.1.0, module version = 1.0.0
> > > >(II) Loading /usr/X11R6-DRI/lib/modules/extensions/libextmod.a
> > > >(II) Module extmod: vendor="The XFree86 Project"
> > > > compiled for 4.1.0, module version = 1.0.0
> > > >(II) Loading /usr/X11R6-DRI/lib/modules/extensions/libglx.a
> > > >(II) Module glx: vendor="The XFree86 Project"
> > > > compiled for 4.1.0, module version = 1.0.0
> > > >(II) Loading /usr/X11R6-DRI/lib/modules/extensions/libGLcore.a
> > > >(II) Module GLcore: vendor="The XFree86 Project"
> > > > compiled for 4.1.0, module version = 1.0.0
> > > >(II) Loading /usr/X11R6-DRI/lib/modules/extensions/libpex5.a
> > > >(II) Module pex5: vendor="The XFree86 Project"
> > > > compiled for 4.1.0, module version = 1.0.0
> > > >(II) Loading /usr/X11R6-DRI/lib/modules/extensions/librecord.a
> > > >(II) Module record: vendor="The XFree86 Project"
> > > > compiled for 4.1.0, module version = 1.13.0
> > > >(II) Loading /usr/X11R6-DRI/lib/modules/extensions/libxie.a
> > > >(II) Module xie: vendor="The XFree86 Project"
> > > > compiled for 4.1.0, module version = 1.0.0
> > > >(II) Loading /usr/X11R6-DRI/lib/modules/fonts/libspeedo.a
> > > >(II) Module speedo: vendor="The XFree86 Project"
> > > > compiled for 4.1.0, module version = 1.0.0
> > > >(II) Loading /usr/X11R6-DRI/lib/modules/fonts/libtype1.a
> > > >(II) Module type1: vendor="The XFree86 Project"
> > > > compiled for 4.1.0, module version = 1.0.0
> > > >(II) Loading /usr/X11R6-DRI/lib/modules/drivers/ati_drv.o
> > > >(II) Module ati: vendor="The XFree86 Project"
> > > > compiled for 4.1.0, module version = 6.3.6
> > > >(II) Loading /usr/X11R6-DRI/lib/modules/input/mouse_drv.o
> > > >(II) Module mouse: vendor="The XFree86 Project"
> > > > compiled for 4.1.0, module version = 1.0.0
> > > >(II) ATI: ATI driver (version 6.3.6) for chipsets: ati, ativga
> > > >(II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),
> > > > ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI),
> > > > ATI Rage 128 RL (AGP), ATI Rage 128 Pro PD (PCI),
> > > > ATI Rage 128 Pro PF (AGP), ATI Rage 128 Mobility LE (PCI),
> > > > ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP),
> > > > ATI Rage 128 Mobility ML (AGP)
> > > >(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
> > > > ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
> > > > ATI Radeon VE (AGP)
> > > >(II) Loading /usr/X11R6-DRI/lib/modules/drivers/atimisc_drv.o
> > > >(II) Module atimisc: vendor="The XFree86 Project"
> > > > compiled for 4.1.0, module version = 6.3.6
> > > >(==) ATI(0): Chipset:  "ati".
> > > >(**) ATI(0): Depth 16, (--) framebuffer bpp 16
> > > >(II) Loading /usr/X11R6-DRI/lib/modules/linux/libint10.a
> > > >(II) Module int10: vendor="The XFree86 Project"
> > > > compiled for 4.1.0, module version = 1.0.0
> > > >(II) ATI(0): Primary V_BIOS segment is: 0xc000
> > > >(II) Loading /usr/X11R6-DRI/lib/modules/libddc.a
> > > >(II) Module ddc: vendor="The XFree86 Project"
> > > > compiled for 4.1.0, module version = 1.0.0
> > > >(II) Loading /usr/X11R6-DRI/lib/modules/libvbe.a
> > > >(II) Module vbe: vendor="The XFree86 Project"
> > > > compiled for 4.1.0, module version = 1.0.0
> > > >(II) ATI(0): VESA BIOS detected
> > > >(II) ATI(0): VESA VBE DDC supported
> > > >(--) ATI(0): ATI 3D Rage Mobility graphics controller detected.
> > > >(--) ATI(0): Chip type 4C4D "LM", version 4, foundry TSMC, class 0, revision 
>0x01.
> > > >(--) ATI(0): AGP bus interface detected;  block I/O base is 0x2000.
> > > >(--) ATI(0): ATI Mach64 adapter detected.
> > > >(--) ATI(0): Internal RAMDAC (subtype 1) detected.
> > > >(==) ATI(0): RGB weight 565
> > > >(==) ATI(0): Default visual is TrueColor
> > > >(==) ATI(0): Using gamma correction (1.0, 1.0, 1.0)
> > > >(II) ATI(0): Using Mach64 accelerator CRTC.
> > > >(--) ATI(0): 1024x768 panel (ID 4) detected.
> > > >(--) ATI(0): Panel model Hitachi TX38D73VC1CAC.
> > > >(--) ATI(0): Panel clock is 65.146 MHz.
> > > >(II) ATI(0): Using digital flat panel interface.
> > > >(II) ATI(0): Storing hardware cursor image at 0xFD7FFC00.
> > > >(II) ATI(0): Using 8 MB linear aperture at 0xFD000000.
> > > >(!!) ATI(0): Virtual resolutions will be limited to 8191 kB
> > > > due to linear aperture size and/or placement of hardware cursor image area.
> > > >(II) ATI(0): Using Block 0 MMIO aperture at 0xFC000400.
> > > >(II) ATI(0): Using Block 1 MMIO aperture at 0xFC000000.
> > > >(==) ATI(0): Write-combining range (0xfd000000,0x800000)
> > > >(II) ATI(0): MMIO write caching enabled.
> > > >(--) ATI(0): 8192 kB of SGRAM (1:1) detected (using 8191 kB).
> > > >(WW) ATI(0): Cannot shadow an accelerated frame buffer.
> > > >(--) ATI(0): Internal programmable clock generator detected.
> > > >(--) ATI(0): Reference clock 29.500 MHz.
> > > >(II) ATI(0): Maximum clock: 230.00 MHz
> > > >(II) ATI(0): Not using default mode "1152x864" (exceeds panel dimensions)
> > > >(II) ATI(0): Not using default mode "1280x960" (exceeds panel dimensions)
> > > >(II) ATI(0): Not using default mode "1280x960" (exceeds panel dimensions)
> > > >(II) ATI(0): Not using default mode "1280x1024" (exceeds panel dimensions)
> > > >(II) ATI(0): Not using default mode "1280x1024" (exceeds panel dimensions)
> > > >(II) ATI(0): Not using default mode "1280x1024" (exceeds panel dimensions)
> > > >(II) ATI(0): Not using default mode "1600x1200" (exceeds panel dimensions)
> > > >(II) ATI(0): Not using default mode "1600x1200" (exceeds panel dimensions)
> > > >(II) ATI(0): Not using default mode "1600x1200" (exceeds panel dimensions)
> > > >(II) ATI(0): Not using default mode "1600x1200" (exceeds panel dimensions)
> > > >(II) ATI(0): Not using default mode "1600x1200" (exceeds panel dimensions)
> > > >(II) ATI(0): Not using default mode "1792x1344" (exceeds panel dimensions)
> > > >(II) ATI(0): Not using default mode "1792x1344" (bad mode 
>clock/interlace/doublescan)
> > > >(II) ATI(0): Not using default mode "1856x1392" (exceeds panel dimensions)
> > > >(II) ATI(0): Not using default mode "1856x1392" (bad mode 
>clock/interlace/doublescan)
> > > >(II) ATI(0): Not using default mode "1920x1440" (bad mode 
>clock/interlace/doublescan)
> > > >(II) ATI(0): Not using default mode "1920x1440" (bad mode 
>clock/interlace/doublescan)
> > > >(II) ATI(0): Not using default mode "1400x1050" (exceeds panel dimensions)
> > > >(II) ATI(0): Not using default mode "1400x1050" (exceeds panel dimensions)
> > > >(II) ATI(0): Not using default mode "1600x1024" (exceeds panel dimensions)
> > > >(--) ATI(0): Virtual size is 1024x768 (pitch 1024)
> > > >(**) ATI(0): Default mode "1024x768": 65.1 MHz, 49.7 kHz, 62.7 Hz
> > > >(==) ATI(0): DPI set to (75, 75)
> > > >(II) Loading /usr/X11R6-DRI/lib/modules/libxaa.a
> > > >(II) Module xaa: vendor="The XFree86 Project"
> > > > compiled for 4.1.0, module version = 1.0.0
> > > >(II) Loading /usr/X11R6-DRI/lib/modules/libramdac.a
> > > >(II) Module ramdac: vendor="The XFree86 Project"
> > > > compiled for 4.1.0, module version = 0.1.0
> > > >(II) Loading /usr/X11R6-DRI/lib/modules/libfb.a
> > > >(II) Module fb: vendor="The XFree86 Project"
> > > > compiled for 4.1.0, module version = 1.0.0
> > > >(==) ATI(0): Write-combining range (0xfd000000,0x800000)
> > > >(II) ATI(0): Using XFree86 Acceleration Architecture (XAA)
> > > > Screen to screen bit blits
> > > > Solid filled rectangles
> > > > 8x8 mono pattern filled rectangles
> > > > Indirect CPU to Screen color expansion
> > > > Solid Lines
> > > > Offscreen Pixmaps
> > > > Setting up tile and stipple cache:
> > > >         32 128x128 slots
> > > >         18 256x256 slots
> > > >         6 512x512 slots
> > > >(==) ATI(0): Backing store disabled
> > > >(==) ATI(0): Silken mouse enabled
> > > >(**) Mouse0: Protocol: "PS/2"
> > > >(**) Mouse0: Core Pointer
> > > >(==) Mouse0: Buttons: 3
> > > >(II) Keyboard "Keyboard0" handled by legacy driver
> > > >(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
> > > >Couldn't load XKB keymap, falling back to pre-XKB keymap
> > > >Eterm:  Error:  unexpected argument 80x40+0+0 -- expected option
> > > >Eterm:  Error:  Attempting to continue, but strange things may happen.
> > > >X connection to :0.0 broken (explicit kill or server shutdown).
> > > >
> > > >Below is the output from glxinfo:
> > > >
> > > >name of display: :0.0
> > > >display: :0  screen: 0
> > > >direct rendering: No
> > > >server glx vendor string: SGI
> > > >server glx version string: 1.2
> > > >server glx extensions:
> > > >    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context
> > > >client glx vendor string: SGI
> > > >client glx version string: 1.2
> > > >client glx extensions:
> > > >    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context
> > > >GLX extensions:
> > > >    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context
> > > >OpenGL vendor string: VA Linux Systems, Inc.
> > > >OpenGL renderer string: Mesa GLX Indirect
> > > >OpenGL version string: 1.2 Mesa 3.4.2
> > > >OpenGL extensions:
> > > >    GL_ARB_multitexture, GL_EXT_abgr, GL_EXT_blend_color, 
> > > >    GL_EXT_blend_minmax, GL_EXT_blend_subtract
> > > >glu version: 1.1 Mesa 3.4.1
> > > >glu extensions:
> > > >    GL_EXT_abgr
> > > >
> > > >   visual  x  bf lv rg d st colorbuffer ax dp st accumbuffer  ms  cav
> > > > id dep cl sp sz l  ci b ro  r  g  b  a bf th cl  r  g  b  a ns b eat
> > > >----------------------------------------------------------------------
> > > >0x23 16 tc  0 16  0 r  y  .  5  6  5  0  0 16  0  0  0  0  0  0 0 None
> > > >0x24 16 tc  0 16  0 r  y  .  5  6  5  0  0 16  8 16 16 16  0  0 0 None
> > > >0x25 16 dc  0 16  0 r  y  .  5  6  5  0  0 16  0  0  0  0  0  0 0 None
> > > >0x26 16 dc  0 16  0 r  y  .  5  6  5  0  0 16  8 16 16 16  0  0 0 None
> > > >
> > > >Below is the output from xdpyinfo:
> > > >
> > > >name of display:    :0.0
> > > >version number:    11.0
> > > >vendor string:    The XFree86 Project, Inc
> > > >vendor release number:    40199001
> > > >XFree86 version: 4.1.99.1
> > > >maximum request size:  4194300 bytes
> > > >motion buffer size:  256
> > > >bitmap unit, bit order, padding:    32, LSBFirst, 32
> > > >image byte order:    LSBFirst
> > > >number of supported pixmap formats:    7
> > > >supported pixmap formats:
> > > >    depth 1, bits_per_pixel 1, scanline_pad 32
> > > >    depth 4, bits_per_pixel 8, scanline_pad 32
> > > >    depth 8, bits_per_pixel 8, scanline_pad 32
> > > >    depth 15, bits_per_pixel 16, scanline_pad 32
> > > >    depth 16, bits_per_pixel 16, scanline_pad 32
> > > >    depth 24, bits_per_pixel 32, scanline_pad 32
> > > >    depth 32, bits_per_pixel 32, scanline_pad 32
> > > >keycode range:    minimum 8, maximum 255
> > > >focus:  window 0x200041, revert to PointerRoot
> > > >number of extensions:    29
> > > >    BIG-REQUESTS
> > > >    DOUBLE-BUFFER
> > > >    DPMS
> > > >    Extended-Visual-Information
> > > >    FontCache
> > > >    GLX
> > > >    LBX
> > > >    MIT-SCREEN-SAVER
> > > >    MIT-SHM
> > > >    MIT-SUNDRY-NONSTANDARD
> > > >    RECORD
> > > >    RENDER
> > > >    SECURITY
> > > >    SGI-GLX
> > > >    SHAPE
> > > >    SYNC
> > > >    TOG-CUP
> > > >    X3D-PEX
> > > >    XC-APPGROUP
> > > >    XC-MISC
> > > >    XFree86-Bigfont
> > > >    XFree86-DGA
> > > >    XFree86-Misc
> > > >    XFree86-VidModeExtension
> > > >    XIE
> > > >    XInputExtension
> > > >    XKEYBOARD
> > > >    XTEST
> > > >    XVideo
> > > >default screen number:    0
> > > >number of screens:    1
> > > >
> > > >screen #0:
> > > >  dimensions:    1024x768 pixels (347x260 millimeters)
> > > >  resolution:    75x75 dots per inch
> > > >  depths (7):    16, 1, 4, 8, 15, 24, 32
> > > >  root window id:    0x3b
> > > >  depth of root window:    16 planes
> > > >  number of colormaps:    minimum 1, maximum 1
> > > >  default colormap:    0x20
> > > >  default number of colormap cells:    64
> > > >  preallocated pixels:    black 0, white 65535
> > > >  options:    backing-store NO, save-unders NO
> > > >  largest cursor:    64x64
> > > >  current input event mask:    0x58207f
> > > >    KeyPressMask             KeyReleaseMask           ButtonPressMask          
> > > >    ButtonReleaseMask        EnterWindowMask          LeaveWindowMask          
> > > >    PointerMotionMask        ButtonMotionMask         SubstructureNotifyMask   
> > > >    SubstructureRedirectMask PropertyChangeMask       
> > > >  number of visuals:    4
> > > >  default visual id:  0x23
> > > >  visual:
> > > >    visual id:    0x23
> > > >    class:    TrueColor
> > > >    depth:    16 planes
> > > >    available colormap entries:    64 per subfield
> > > >    red, green, blue masks:    0xf800, 0x7e0, 0x1f
> > > >    significant bits in color specification:    6 bits
> > > >  visual:
> > > >    visual id:    0x24
> > > >    class:    TrueColor
> > > >    depth:    16 planes
> > > >    available colormap entries:    64 per subfield
> > > >    red, green, blue masks:    0xf800, 0x7e0, 0x1f
> > > >    significant bits in color specification:    6 bits
> > > >  visual:
> > > >    visual id:    0x25
> > > >    class:    DirectColor
> > > >    depth:    16 planes
> > > >    available colormap entries:    64 per subfield
> > > >    red, green, blue masks:    0xf800, 0x7e0, 0x1f
> > > >    significant bits in color specification:    6 bits
> > > >  visual:
> > > >    visual id:    0x26
> > > >    class:    DirectColor
> > > >    depth:    16 planes
> > > >    available colormap entries:    64 per subfield
> > > >    red, green, blue masks:    0xf800, 0x7e0, 0x1f
> > > >    significant bits in color specification:    6 bits
> > > >
> > > >Below is my XF86Config File:
> > > >
> > > >Section "ServerLayout"
> > > > Identifier     "XFree86 Configured"
> > > > Screen      0  "Screen0" 0 0
> > > > InputDevice    "Mouse0" "CorePointer"
> > > > InputDevice    "Keyboard0" "CoreKeyboard"
> > > >EndSection
> > > >
> > > >Section "Files"
> > > > RgbPath      "/usr/X11R6-DRI/lib/X11/rgb"
> > > > ModulePath   "/usr/X11R6-DRI/lib/modules"
> > > > FontPath     "/usr/X11R6-DRI/lib/X11/fonts/misc/"
> > > > FontPath     "/usr/X11R6-DRI/lib/X11/fonts/Speedo/"
> > > > FontPath     "/usr/X11R6-DRI/lib/X11/fonts/Type1/"
> > > > FontPath     "/usr/X11R6-DRI/lib/X11/fonts/CID/"
> > > > FontPath     "/usr/X11R6-DRI/lib/X11/fonts/75dpi/"
> > > > FontPath     "/usr/X11R6-DRI/lib/X11/fonts/100dpi/"
> > > >EndSection
> > > >
> > > >Section "Module"
> > > > Load  "dbe"
> > > > Load  "dri"
> > > > Load  "extmod"
> > > > Load  "glx"
> > > > Load  "pex5"
> > > > Load  "record"
> > > > Load  "xie"
> > > > Load  "speedo"
> > > > Load  "type1"
> > > >EndSection
> > > >
> > > >Section "InputDevice"
> > > > Identifier  "Keyboard0"
> > > > Driver      "keyboard"
> > > >EndSection
> > > >
> > > >Section "InputDevice"
> > > > Identifier  "Mouse0"
> > > > Driver      "mouse"
> > > > Option      "Protocol" "PS/2"
> > > > Option      "Device" "/dev/mouse"
> > > >EndSection
> > > >
> > > >Section "Monitor"
> > > > Identifier   "Monitor0"
> > > > VendorName   "Monitor Vendor"
> > > > ModelName    "Monitor Model"
> > > >EndSection
> > > >
> > > >Section "Device"
> > > >        ### Available Driver options are:-
> > > >        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
> > > >        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
> > > >        ### [arg]: arg optional
> > > >        #Option     "ShadowFB"                   # [<bool>]
> > > > Identifier  "Card0"
> > > > Driver      "ati"
> > > > VendorName  "ATI"
> > > > BoardName   "Mach64 LM"
> > > > BusID       "PCI:1:0:0"
> > > >EndSection
> > > >
> > > >Section "Screen"
> > > > Identifier "Screen0"
> > > > Device     "Card0"
> > > > Monitor    "Monitor0"
> > > > DefaultDepth 16
> > > > SubSection "Display"
> > > >         Depth     1
> > > > EndSubSection
> > > > SubSection "Display"
> > > >         Depth     4
> > > > EndSubSection
> > > > SubSection "Display"
> > > >         Depth     8
> > > > EndSubSection
> > > > SubSection "Display"
> > > >         Depth     15
> > > > EndSubSection
> > > > SubSection "Display"
> > > >         Depth     16
> > > > EndSubSection
> > > > SubSection "Display"
> > > >         Depth     24
> > > > EndSubSection
> > > >EndSection
> > > >
> > > >Section "DRI"
> > > > Mode 0666       
> > > >EndSection
> > > >
> > > >
> > > >_______________________________________________
> > > >Dri-devel mailing list
> > > >[EMAIL PROTECTED]
> > > >https://lists.sourceforge.net/lists/listinfo/dri-devel
> > > >
> > > 
> > 
> > 
> > 
> > _______________________________________________
> > Dri-devel mailing list
> > [EMAIL PROTECTED]
> > https://lists.sourceforge.net/lists/listinfo/dri-devel
> > 
> 
> -- 
> Leif Delgass 
> 
> 



_______________________________________________
Dri-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/dri-devel

Reply via email to