Where are you placing the mach64*.o modules?
You should be putting them somewhere under your kernel module directory 
(/lib/modules/2.4.5*)  The mach64 modules are not built automatically by 
the DRI make World command.  To compile these modules, cd to 
DRI-SOURCE/xc/xc/programs/Xserver/hw/xfree86/os-support/linux/drm/kernel/ 
 then do gmake -f Makefile.linux  then just copy mach64*.o to your 
kernel module directory (somewhere under there).

Liam Wilks wrote:

>Could somebody please help me? I have compiled the latest
>mach64-0-0-2-branch from cvs, and I can not get direct rendering to
>load. 
>
>The latest dri kernel modules install properly, and so does the agpgart
>kernel module. My video card reports that bus mastering is enabled. And
>I have activated MTRR in the kernel. 
>
>I am running Redhat 7.1 on a Dell Inspiron 7500 Pentium III 500 with 128
>MB SDRAM. Kernel version 2.4.5 with patches for Win4Lin. My video card
>is an ATI Rage Mobility P/M with 8mb SGRAM, which is a Mach64 based
>card.
>
>I will print what information I have below. Sorry if it seems a bit
>excessive.
>
>Any help anybody can give me would be much appreciated.
>
>Below is the output from starting the DRI X server: 
>
>This is a pre-release version of XFree86, and is not supported in any
>way.  Bugs may be reported to [EMAIL PROTECTED] and patches submitted
>to [EMAIL PROTECTED]  Before reporting bugs in pre-release versions,
>please check the latest version in the XFree86 CVS repository
>(http://www.XFree86.Org/cvs)
>
>XFree86 Version 4.1.99.1 (DRI mach64 branch) / X Window System
>(protocol Version 11, revision 0, vendor release 6510)
>Release Date: 20 August 2001
>       If the server is older than 6-12 months, or if your card is
>       newer than the above date, look for a newer version before
>       reporting problems.  (See http://www.XFree86.Org/FAQ)
>Build Operating System: Linux 2.4.5-win4lin i686 [ELF] 
>Module Loader present
>(==) Log file: "/var/log/XFree86.0.log", Time: Mon Oct 29 13:49:07 2001
>(++) Using config file: "XF86Config"
>Markers: (--) probed, (**) from config file, (==) default setting,
>         (++) from command line, (!!) notice, (II) informational,
>         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>(==) ServerLayout "XFree86 Configured"
>(**) |-->Screen "Screen0" (0)
>(**) |   |-->Monitor "Monitor0"
>(**) |   |-->Device "Card0"
>(**) |-->Input Device "Mouse0"
>(**) |-->Input Device "Keyboard0"
>(**) FontPath set to 
>"/usr/X11R6-DRI/lib/X11/fonts/misc/,/usr/X11R6-DRI/lib/X11/fonts/Speedo/,/usr/X11R6-DRI/lib/X11/fonts/Type1/,/usr/X11R6-DRI/lib/X11/fonts/CID/,/usr/X11R6-DRI/lib/X11/fonts/75dpi/,/usr/X11R6-DRI/lib/X11/fonts/100dpi/"
>(**) RgbPath set to "/usr/X11R6-DRI/lib/X11/rgb"
>(**) ModulePath set to "/usr/X11R6-DRI/lib/modules"
>(--) using VT number 7
>
>(II) Loading /usr/X11R6-DRI/lib/modules/fonts/libbitmap.a
>(II) Module bitmap: vendor="The XFree86 Project"
>       compiled for 4.1.0, module version = 1.0.0
>(II) Loading /usr/X11R6-DRI/lib/modules/libpcidata.a
>(II) Module pcidata: vendor="The XFree86 Project"
>       compiled for 4.1.0, module version = 0.1.0
>(II) Loading /usr/X11R6-DRI/lib/modules/libscanpci.a
>(II) Module scanpci: vendor="The XFree86 Project"
>       compiled for 4.1.0, module version = 0.1.0
>(II) Unloading /usr/X11R6-DRI/lib/modules/libscanpci.a
>(--) PCI:*(1:0:0) ATI Mach64 LM rev 100, Mem @ 0xfd000000/24, 0xfc000000/12, I/O @ 
>0x2000/8
>(II) Loading /usr/X11R6-DRI/lib/modules/extensions/libdbe.a
>(II) Module dbe: vendor="The XFree86 Project"
>       compiled for 4.1.0, module version = 1.0.0
>(II) Loading /usr/X11R6-DRI/lib/modules/extensions/libdri.a
>(II) Module dri: vendor="The XFree86 Project"
>       compiled for 4.1.0, module version = 1.0.0
>(II) Loading /usr/X11R6-DRI/lib/modules/linux/libdrm.a
>(II) Module drm: vendor="The XFree86 Project"
>       compiled for 4.1.0, module version = 1.0.0
>(II) Loading /usr/X11R6-DRI/lib/modules/extensions/libextmod.a
>(II) Module extmod: vendor="The XFree86 Project"
>       compiled for 4.1.0, module version = 1.0.0
>(II) Loading /usr/X11R6-DRI/lib/modules/extensions/libglx.a
>(II) Module glx: vendor="The XFree86 Project"
>       compiled for 4.1.0, module version = 1.0.0
>(II) Loading /usr/X11R6-DRI/lib/modules/extensions/libGLcore.a
>(II) Module GLcore: vendor="The XFree86 Project"
>       compiled for 4.1.0, module version = 1.0.0
>(II) Loading /usr/X11R6-DRI/lib/modules/extensions/libpex5.a
>(II) Module pex5: vendor="The XFree86 Project"
>       compiled for 4.1.0, module version = 1.0.0
>(II) Loading /usr/X11R6-DRI/lib/modules/extensions/librecord.a
>(II) Module record: vendor="The XFree86 Project"
>       compiled for 4.1.0, module version = 1.13.0
>(II) Loading /usr/X11R6-DRI/lib/modules/extensions/libxie.a
>(II) Module xie: vendor="The XFree86 Project"
>       compiled for 4.1.0, module version = 1.0.0
>(II) Loading /usr/X11R6-DRI/lib/modules/fonts/libspeedo.a
>(II) Module speedo: vendor="The XFree86 Project"
>       compiled for 4.1.0, module version = 1.0.0
>(II) Loading /usr/X11R6-DRI/lib/modules/fonts/libtype1.a
>(II) Module type1: vendor="The XFree86 Project"
>       compiled for 4.1.0, module version = 1.0.0
>(II) Loading /usr/X11R6-DRI/lib/modules/drivers/ati_drv.o
>(II) Module ati: vendor="The XFree86 Project"
>       compiled for 4.1.0, module version = 6.3.6
>(II) Loading /usr/X11R6-DRI/lib/modules/input/mouse_drv.o
>(II) Module mouse: vendor="The XFree86 Project"
>       compiled for 4.1.0, module version = 1.0.0
>(II) ATI: ATI driver (version 6.3.6) for chipsets: ati, ativga
>(II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),
>       ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI),
>       ATI Rage 128 RL (AGP), ATI Rage 128 Pro PD (PCI),
>       ATI Rage 128 Pro PF (AGP), ATI Rage 128 Mobility LE (PCI),
>       ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP),
>       ATI Rage 128 Mobility ML (AGP)
>(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
>       ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
>       ATI Radeon VE (AGP)
>(II) Loading /usr/X11R6-DRI/lib/modules/drivers/atimisc_drv.o
>(II) Module atimisc: vendor="The XFree86 Project"
>       compiled for 4.1.0, module version = 6.3.6
>(==) ATI(0): Chipset:  "ati".
>(**) ATI(0): Depth 16, (--) framebuffer bpp 16
>(II) Loading /usr/X11R6-DRI/lib/modules/linux/libint10.a
>(II) Module int10: vendor="The XFree86 Project"
>       compiled for 4.1.0, module version = 1.0.0
>(II) ATI(0): Primary V_BIOS segment is: 0xc000
>(II) Loading /usr/X11R6-DRI/lib/modules/libddc.a
>(II) Module ddc: vendor="The XFree86 Project"
>       compiled for 4.1.0, module version = 1.0.0
>(II) Loading /usr/X11R6-DRI/lib/modules/libvbe.a
>(II) Module vbe: vendor="The XFree86 Project"
>       compiled for 4.1.0, module version = 1.0.0
>(II) ATI(0): VESA BIOS detected
>(II) ATI(0): VESA VBE DDC supported
>(--) ATI(0): ATI 3D Rage Mobility graphics controller detected.
>(--) ATI(0): Chip type 4C4D "LM", version 4, foundry TSMC, class 0, revision 0x01.
>(--) ATI(0): AGP bus interface detected;  block I/O base is 0x2000.
>(--) ATI(0): ATI Mach64 adapter detected.
>(--) ATI(0): Internal RAMDAC (subtype 1) detected.
>(==) ATI(0): RGB weight 565
>(==) ATI(0): Default visual is TrueColor
>(==) ATI(0): Using gamma correction (1.0, 1.0, 1.0)
>(II) ATI(0): Using Mach64 accelerator CRTC.
>(--) ATI(0): 1024x768 panel (ID 4) detected.
>(--) ATI(0): Panel model Hitachi TX38D73VC1CAC.
>(--) ATI(0): Panel clock is 65.146 MHz.
>(II) ATI(0): Using digital flat panel interface.
>(II) ATI(0): Storing hardware cursor image at 0xFD7FFC00.
>(II) ATI(0): Using 8 MB linear aperture at 0xFD000000.
>(!!) ATI(0): Virtual resolutions will be limited to 8191 kB
> due to linear aperture size and/or placement of hardware cursor image area.
>(II) ATI(0): Using Block 0 MMIO aperture at 0xFC000400.
>(II) ATI(0): Using Block 1 MMIO aperture at 0xFC000000.
>(==) ATI(0): Write-combining range (0xfd000000,0x800000)
>(II) ATI(0): MMIO write caching enabled.
>(--) ATI(0): 8192 kB of SGRAM (1:1) detected (using 8191 kB).
>(WW) ATI(0): Cannot shadow an accelerated frame buffer.
>(--) ATI(0): Internal programmable clock generator detected.
>(--) ATI(0): Reference clock 29.500 MHz.
>(II) ATI(0): Maximum clock: 230.00 MHz
>(II) ATI(0): Not using default mode "1152x864" (exceeds panel dimensions)
>(II) ATI(0): Not using default mode "1280x960" (exceeds panel dimensions)
>(II) ATI(0): Not using default mode "1280x960" (exceeds panel dimensions)
>(II) ATI(0): Not using default mode "1280x1024" (exceeds panel dimensions)
>(II) ATI(0): Not using default mode "1280x1024" (exceeds panel dimensions)
>(II) ATI(0): Not using default mode "1280x1024" (exceeds panel dimensions)
>(II) ATI(0): Not using default mode "1600x1200" (exceeds panel dimensions)
>(II) ATI(0): Not using default mode "1600x1200" (exceeds panel dimensions)
>(II) ATI(0): Not using default mode "1600x1200" (exceeds panel dimensions)
>(II) ATI(0): Not using default mode "1600x1200" (exceeds panel dimensions)
>(II) ATI(0): Not using default mode "1600x1200" (exceeds panel dimensions)
>(II) ATI(0): Not using default mode "1792x1344" (exceeds panel dimensions)
>(II) ATI(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
>(II) ATI(0): Not using default mode "1856x1392" (exceeds panel dimensions)
>(II) ATI(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
>(II) ATI(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
>(II) ATI(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
>(II) ATI(0): Not using default mode "1400x1050" (exceeds panel dimensions)
>(II) ATI(0): Not using default mode "1400x1050" (exceeds panel dimensions)
>(II) ATI(0): Not using default mode "1600x1024" (exceeds panel dimensions)
>(--) ATI(0): Virtual size is 1024x768 (pitch 1024)
>(**) ATI(0): Default mode "1024x768": 65.1 MHz, 49.7 kHz, 62.7 Hz
>(==) ATI(0): DPI set to (75, 75)
>(II) Loading /usr/X11R6-DRI/lib/modules/libxaa.a
>(II) Module xaa: vendor="The XFree86 Project"
>       compiled for 4.1.0, module version = 1.0.0
>(II) Loading /usr/X11R6-DRI/lib/modules/libramdac.a
>(II) Module ramdac: vendor="The XFree86 Project"
>       compiled for 4.1.0, module version = 0.1.0
>(II) Loading /usr/X11R6-DRI/lib/modules/libfb.a
>(II) Module fb: vendor="The XFree86 Project"
>       compiled for 4.1.0, module version = 1.0.0
>(==) ATI(0): Write-combining range (0xfd000000,0x800000)
>(II) ATI(0): Using XFree86 Acceleration Architecture (XAA)
>       Screen to screen bit blits
>       Solid filled rectangles
>       8x8 mono pattern filled rectangles
>       Indirect CPU to Screen color expansion
>       Solid Lines
>       Offscreen Pixmaps
>       Setting up tile and stipple cache:
>               32 128x128 slots
>               18 256x256 slots
>               6 512x512 slots
>(==) ATI(0): Backing store disabled
>(==) ATI(0): Silken mouse enabled
>(**) Mouse0: Protocol: "PS/2"
>(**) Mouse0: Core Pointer
>(==) Mouse0: Buttons: 3
>(II) Keyboard "Keyboard0" handled by legacy driver
>(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
>Couldn't load XKB keymap, falling back to pre-XKB keymap
>Eterm:  Error:  unexpected argument 80x40+0+0 -- expected option
>Eterm:  Error:  Attempting to continue, but strange things may happen.
>X connection to :0.0 broken (explicit kill or server shutdown).
>
>Below is the output from glxinfo:
>
>name of display: :0.0
>display: :0  screen: 0
>direct rendering: No
>server glx vendor string: SGI
>server glx version string: 1.2
>server glx extensions:
>    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context
>client glx vendor string: SGI
>client glx version string: 1.2
>client glx extensions:
>    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context
>GLX extensions:
>    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context
>OpenGL vendor string: VA Linux Systems, Inc.
>OpenGL renderer string: Mesa GLX Indirect
>OpenGL version string: 1.2 Mesa 3.4.2
>OpenGL extensions:
>    GL_ARB_multitexture, GL_EXT_abgr, GL_EXT_blend_color, 
>    GL_EXT_blend_minmax, GL_EXT_blend_subtract
>glu version: 1.1 Mesa 3.4.1
>glu extensions:
>    GL_EXT_abgr
>
>   visual  x  bf lv rg d st colorbuffer ax dp st accumbuffer  ms  cav
> id dep cl sp sz l  ci b ro  r  g  b  a bf th cl  r  g  b  a ns b eat
>----------------------------------------------------------------------
>0x23 16 tc  0 16  0 r  y  .  5  6  5  0  0 16  0  0  0  0  0  0 0 None
>0x24 16 tc  0 16  0 r  y  .  5  6  5  0  0 16  8 16 16 16  0  0 0 None
>0x25 16 dc  0 16  0 r  y  .  5  6  5  0  0 16  0  0  0  0  0  0 0 None
>0x26 16 dc  0 16  0 r  y  .  5  6  5  0  0 16  8 16 16 16  0  0 0 None
>
>Below is the output from xdpyinfo:
>
>name of display:    :0.0
>version number:    11.0
>vendor string:    The XFree86 Project, Inc
>vendor release number:    40199001
>XFree86 version: 4.1.99.1
>maximum request size:  4194300 bytes
>motion buffer size:  256
>bitmap unit, bit order, padding:    32, LSBFirst, 32
>image byte order:    LSBFirst
>number of supported pixmap formats:    7
>supported pixmap formats:
>    depth 1, bits_per_pixel 1, scanline_pad 32
>    depth 4, bits_per_pixel 8, scanline_pad 32
>    depth 8, bits_per_pixel 8, scanline_pad 32
>    depth 15, bits_per_pixel 16, scanline_pad 32
>    depth 16, bits_per_pixel 16, scanline_pad 32
>    depth 24, bits_per_pixel 32, scanline_pad 32
>    depth 32, bits_per_pixel 32, scanline_pad 32
>keycode range:    minimum 8, maximum 255
>focus:  window 0x200041, revert to PointerRoot
>number of extensions:    29
>    BIG-REQUESTS
>    DOUBLE-BUFFER
>    DPMS
>    Extended-Visual-Information
>    FontCache
>    GLX
>    LBX
>    MIT-SCREEN-SAVER
>    MIT-SHM
>    MIT-SUNDRY-NONSTANDARD
>    RECORD
>    RENDER
>    SECURITY
>    SGI-GLX
>    SHAPE
>    SYNC
>    TOG-CUP
>    X3D-PEX
>    XC-APPGROUP
>    XC-MISC
>    XFree86-Bigfont
>    XFree86-DGA
>    XFree86-Misc
>    XFree86-VidModeExtension
>    XIE
>    XInputExtension
>    XKEYBOARD
>    XTEST
>    XVideo
>default screen number:    0
>number of screens:    1
>
>screen #0:
>  dimensions:    1024x768 pixels (347x260 millimeters)
>  resolution:    75x75 dots per inch
>  depths (7):    16, 1, 4, 8, 15, 24, 32
>  root window id:    0x3b
>  depth of root window:    16 planes
>  number of colormaps:    minimum 1, maximum 1
>  default colormap:    0x20
>  default number of colormap cells:    64
>  preallocated pixels:    black 0, white 65535
>  options:    backing-store NO, save-unders NO
>  largest cursor:    64x64
>  current input event mask:    0x58207f
>    KeyPressMask             KeyReleaseMask           ButtonPressMask          
>    ButtonReleaseMask        EnterWindowMask          LeaveWindowMask          
>    PointerMotionMask        ButtonMotionMask         SubstructureNotifyMask   
>    SubstructureRedirectMask PropertyChangeMask       
>  number of visuals:    4
>  default visual id:  0x23
>  visual:
>    visual id:    0x23
>    class:    TrueColor
>    depth:    16 planes
>    available colormap entries:    64 per subfield
>    red, green, blue masks:    0xf800, 0x7e0, 0x1f
>    significant bits in color specification:    6 bits
>  visual:
>    visual id:    0x24
>    class:    TrueColor
>    depth:    16 planes
>    available colormap entries:    64 per subfield
>    red, green, blue masks:    0xf800, 0x7e0, 0x1f
>    significant bits in color specification:    6 bits
>  visual:
>    visual id:    0x25
>    class:    DirectColor
>    depth:    16 planes
>    available colormap entries:    64 per subfield
>    red, green, blue masks:    0xf800, 0x7e0, 0x1f
>    significant bits in color specification:    6 bits
>  visual:
>    visual id:    0x26
>    class:    DirectColor
>    depth:    16 planes
>    available colormap entries:    64 per subfield
>    red, green, blue masks:    0xf800, 0x7e0, 0x1f
>    significant bits in color specification:    6 bits
>
>Below is my XF86Config File:
>
>Section "ServerLayout"
>       Identifier     "XFree86 Configured"
>       Screen      0  "Screen0" 0 0
>       InputDevice    "Mouse0" "CorePointer"
>       InputDevice    "Keyboard0" "CoreKeyboard"
>EndSection
>
>Section "Files"
>       RgbPath      "/usr/X11R6-DRI/lib/X11/rgb"
>       ModulePath   "/usr/X11R6-DRI/lib/modules"
>       FontPath     "/usr/X11R6-DRI/lib/X11/fonts/misc/"
>       FontPath     "/usr/X11R6-DRI/lib/X11/fonts/Speedo/"
>       FontPath     "/usr/X11R6-DRI/lib/X11/fonts/Type1/"
>       FontPath     "/usr/X11R6-DRI/lib/X11/fonts/CID/"
>       FontPath     "/usr/X11R6-DRI/lib/X11/fonts/75dpi/"
>       FontPath     "/usr/X11R6-DRI/lib/X11/fonts/100dpi/"
>EndSection
>
>Section "Module"
>       Load  "dbe"
>       Load  "dri"
>       Load  "extmod"
>       Load  "glx"
>       Load  "pex5"
>       Load  "record"
>       Load  "xie"
>       Load  "speedo"
>       Load  "type1"
>EndSection
>
>Section "InputDevice"
>       Identifier  "Keyboard0"
>       Driver      "keyboard"
>EndSection
>
>Section "InputDevice"
>       Identifier  "Mouse0"
>       Driver      "mouse"
>       Option      "Protocol" "PS/2"
>       Option      "Device" "/dev/mouse"
>EndSection
>
>Section "Monitor"
>       Identifier   "Monitor0"
>       VendorName   "Monitor Vendor"
>       ModelName    "Monitor Model"
>EndSection
>
>Section "Device"
>        ### Available Driver options are:-
>        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
>        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
>        ### [arg]: arg optional
>        #Option     "ShadowFB"                 # [<bool>]
>       Identifier  "Card0"
>       Driver      "ati"
>       VendorName  "ATI"
>       BoardName   "Mach64 LM"
>       BusID       "PCI:1:0:0"
>EndSection
>
>Section "Screen"
>       Identifier "Screen0"
>       Device     "Card0"
>       Monitor    "Monitor0"
>       DefaultDepth 16
>       SubSection "Display"
>               Depth     1
>       EndSubSection
>       SubSection "Display"
>               Depth     4
>       EndSubSection
>       SubSection "Display"
>               Depth     8
>       EndSubSection
>       SubSection "Display"
>               Depth     15
>       EndSubSection
>       SubSection "Display"
>               Depth     16
>       EndSubSection
>       SubSection "Display"
>               Depth     24
>       EndSubSection
>EndSection
>
>Section "DRI"
>       Mode 0666       
>EndSection
>
>
>_______________________________________________
>Dri-devel mailing list
>[EMAIL PROTECTED]
>https://lists.sourceforge.net/lists/listinfo/dri-devel
>



_______________________________________________
Dri-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/dri-devel

Reply via email to