He had no other problem other than the radio wasn't correctly factory aligned in the adj menu, as should be obvious in his forum post. He extensively checked the swr etc to be good. These are menu adjusted with use of a RJ45 jig plug with a 22 Kohm resistor across pins 2 & 7. I´d get the settings checked by Icom or a tech etc.
Keith wrote: > > -- > So what problem(s) did he have to start with? My ID-800H seems to be > working fine except for the beeps, and they don't occur every > transmission - just occasionally. I normally run the full 50 watts on > both bands - VHF and UHF - without any problem. It seems that the beeps > only occur on DV mode, though. >
