Short answer - No.
Slightly longer answer. A typical D-STAR repeater installation also
includes a gateway. The gateway is a full up Linux server. With that
server you can put any monitoring capabilities you want at the site
(we are looking at putting web cam on a repeater site here as it is at
a remote mountain top) and have it travel through the Internet to
whatever location you desire.
So if you are looking purely at an Icom D-STAR repeater and
controller, with no gateway, it is not available (though someone could
probably figure out a way - I have a couple of ideas in that area),
but if you have the gateway, its pretty easy to create all manner of
monitoring and control.
On Aug 31, 2009, at 12:58 PM, Kent Hufford wrote:
I was asked if a ICOM DSTAR repeater or the controller can "report"
remotely, repeater shack or repeater temperature.
I know many analog repeaters can. I looked at a ICOM DSTAR repeater
rack for about 5 min. And did not see many external connections for
such.
Is there a way to report internal temps remotely?
Thanks
Kent
KQ4KK
John D. Hays
Amateur Radio Station K7VE
PO Box 1223
Edmonds, WA 98020-1223 VOIP/SIP: [email protected]
Email: [email protected]
