Hey, works fine now. Thank you.
Mit freundlichen Grüßen/Best regards/Cordialement, Gion J. Strobel, M.Sc. Scientific Staff & Doctoral Candidate Institute of Petroleum Engineering Reservoir Engineering Department Clausthal University of Technology Agricolastrasse 10, 38678 Clausthal-Zellerfeld, Germany ________________________________ Von: Dumux <[email protected]> im Auftrag von Timo Koch <[email protected]> Gesendet: Donnerstag, 7. Februar 2019 18:07:46 An: [email protected] Cc: Gion Joel Strobel Betreff: Re: [DuMuX] Process Rank MPI cornerpoint Hi Gion, it looks like "loadBalance()" was never called in the corner point grid manager. This should be fixed now on master and release/3.0. Can you check and verify (do a git pull origin releases/3.0, or git pull origin master if you are on master)? Best wishes Timo On 05.02.19 07:43, Gion Joel Strobel wrote: Hi Timo, attached you can find the outputfile and the cmake.opts Mit freundlichen Grüßen/Best regards/Cordialement, Gion J. Strobel, M.Sc. Scientific Staff & Doctoral Candidate Institute of Petroleum Engineering Reservoir Engineering Department Clausthal University of Technology Agricolastrasse 10, 38678 Clausthal-Zellerfeld, Germany ________________________________ Von: Timo Koch <[email protected]><mailto:[email protected]> Gesendet: Donnerstag, 31. Januar 2019 18:37:18 An: [email protected]<mailto:[email protected]>; Gion Joel Strobel Betreff: Re: [DuMuX] Process Rank MPI cornerpoint Hi Gion, this might be an issue with your OPM installation. Can you post the complete output of the dunecontrol run, after you deleted all build directories (fresh build)? What MPI library implementation are you using? Timo On 31.01.19 17:59, Gion Joel Strobel wrote: Update: I realized, the corner point (2pCornerpoint) simulation is not starting parallel. The other test cases (1p/2p2c etc ) works find with multiple processor, so MPI is correct installed. Mit freundlichen Grüßen/Best regards/Cordialement, Gion J. Strobel, M.Sc. Scientific Staff & Doctoral Candidate Institute of Petroleum Engineering Reservoir Engineering Department Clausthal University of Technology Agricolastrasse 10, 38678 Clausthal-Zellerfeld, Germany ________________________________ Von: Dumux <[email protected]><mailto:[email protected]> im Auftrag von Gion Joel Strobel <[email protected]><mailto:[email protected]> Gesendet: Dienstag, 29. Januar 2019 15:44 An: DuMuX User Forum Betreff: [DuMuX] Process Rank MPI cornerpoint Hello, i have a problem displaying the process rank in 2p cornerpointproblem in paraview. It works fine for 1p isothermal, but for the cornerpoint problem, the process rank in paraview stays 0. The dumux I’m using is Version 3.0 without any changes. Best regards, Gion _______________________________________________ Dumux mailing list [email protected]<mailto:[email protected]> https://listserv.uni-stuttgart.de/mailman/listinfo/dumux -- _______________________________________________________________ Timo Koch phone: +49 711 685 64676 IWS, Universität Stuttgart fax: +49 711 685 60430 Pfaffenwaldring 61 email: [email protected]<mailto:[email protected]> D-70569 Stuttgart url: www.hydrosys.uni-stuttgart.de<http://www.hydrosys.uni-stuttgart.de> _______________________________________________________________ _______________________________________________ Dumux mailing list [email protected]<mailto:[email protected]> https://listserv.uni-stuttgart.de/mailman/listinfo/dumux -- _______________________________________________________________ Timo Koch phone: +49 711 685 64676 IWS, Universität Stuttgart fax: +49 711 685 60430 Pfaffenwaldring 61 email: [email protected]<mailto:[email protected]> D-70569 Stuttgart url: www.hydrosys.uni-stuttgart.de<http://www.hydrosys.uni-stuttgart.de> _______________________________________________________________
_______________________________________________ Dumux mailing list [email protected] https://listserv.uni-stuttgart.de/mailman/listinfo/dumux
