Good morning,
yes thanks, this fix the issue.
Best regards,
Lorenzo
On 07.02.2019 20:16, Timo Koch wrote:
Hi Lorenzo,
"test_impes" (unmodified) doesn't use a parallel solver backend. You
need to use a parallel solver as Bernd said in a previous answer to
your post. The only parallel solver is currently the AMGBackend. There
is also a test called "test_impeswithamg". Please try that one in
parallel.
Timo
On 06.02.19 11:58, lc wrote:
Hello,
I'm still fighting to fix the parallel execution.
Now, I re-install mpich/openmpi and configured Dumux 2.12 (and also
3.0.0).
I'm running: porousmediumflow/2p/sequential/test_impes testcase with
1 and 4 core which should be ok for the features of my machine.
This time seems that the parallelism is recognized.
What I notice is that when I run, with multiple cores the time step
size drastically reduces and so the simulation never ends.
There must be something wrong, right?
Kind regards,
Lorenzo
_______________________________________________
Dumux mailing list
[email protected]
https://listserv.uni-stuttgart.de/mailman/listinfo/dumux
--
_______________________________________________________________
Timo Koch phone: +49 711 685 64676
IWS, Universität Stuttgart fax: +49 711 685 60430
Pfaffenwaldring 61 email:[email protected]
D-70569 Stuttgart url:www.hydrosys.uni-stuttgart.de
_______________________________________________________________
_______________________________________________
Dumux mailing list
[email protected]
https://listserv.uni-stuttgart.de/mailman/listinfo/dumux
