Dear Nikolai, Thank you for your reply and the provided instruction. I will give it a try.
Best regards - Siroos On Thu, Sep 30, 2021 at 6:30 PM Nikolai Andrianov <[email protected]> wrote: > Dear Siroos, > > > > You can setup your debugging environment for example using VS Code, > https://code.visualstudio.com. > > For that, you will need to create a folder called .vscode in the folder, > where the executable is located (remember to compile it with the -g option > which allows for debugging). Then, place the files launch.json and > tasks.json there; see example files attached. > > > Now when you start VS Code by typing "code ." in the folder with the > executable you can compile your module using Terminal->Run Build Task, > and debug it by clicking the Run & Debug button in the left side bar. > > > Best regards, > > Nikolai > > > > > > *From:* DuMux <[email protected]> *On Behalf Of *Siroos > Azizmohammadi > *Sent:* Thursday, September 30, 2021 12:37 > *To:* [email protected] > *Subject:* [DuMux] How to setup dumux in an IDE? > > > > Hello, > > > > As I am quite new in dumux and Linux too, I was wondering if there are any > instructions to setup/compile dumux in Qt, Eclipse, or any other IDEs. > > > > Best regards, > > _____________________________ > > *Siroos Azizmohammadi* <https://dpe.ac.at/people/siroos-azizmohammadi/>*, > PhD* > > *Senior Lecturer* > > Chair of Reservoir Engineering > <http://dpe.ac.at/chairs/reservoir-engineering/> > > Department of Petroleum Engineering <http://www.dpe.ac.at> > > Montanuniversität Leoben <http://www.unileoben.ac.at> > > Parkstrasse 27, A-8700 Leoben, Austria > > Mobile: +43 676 59 238 99 > > Office: +43 3842 402 3022 > > Fax: +43 3842 402 3002 > > Email: [email protected] > > _______________________________________________ > DuMux mailing list > [email protected] > https://listserv.uni-stuttgart.de/mailman/listinfo/dumux >
_______________________________________________ DuMux mailing list [email protected] https://listserv.uni-stuttgart.de/mailman/listinfo/dumux
