No it's changed... The options under TX are checkboxes for Net and Use CW Control
6.02 doesn't allow a separate COM port for PSK31 PTT control... It uses the CW PTT. This suits me just fine, but apparently it creates problems for others... > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Joe Giacobello > Sent: January 16, 2004 14:44 > To: Mel > Cc: DX4WIN > Subject: Re: [Dx4win] PSK31 Menu Problem > > > Mel, thanks for your help, and you were partially correct. > By reducing > the font size from 9 to 6, I was able to have the tab headings show > their proper labels. However, I still don't get the options that the > manual says I should. The manual says than under "TX" I should get a > the options for "NET" and "TX Keying". "TX Keying" then should have > check boxes in a submenu for "VOX," "CW Interface" and > "Serial Ports 1 > thru 8". I get no "TX Keying" option at all! I get instead a check > box for "Use CW Control". Something is haywire here, because I can't > select the COM port for my interface. > > I should add that I am using version 6.02 and my manual is > for 6.0. I > am not aware of any updates for the manual. > > Thanks again. > > 73, Joe > > Mel wrote: > > >Check the font selections in screen preferences... > > > > > > > >>-----Original Message----- > >>From: [EMAIL PROTECTED] > >>[mailto:[EMAIL PROTECTED] On Behalf Of Joe Giacobello > >>Sent: January 15, 2004 17:06 > >>To: DX4WIN > >>Subject: [Dx4win] PSK31 Menu Problem > >> > >> > >>I have a very mysterious problem when I try to adjust the TX > >>(transmit > >>parameters) settings in the PSK31 window. First of all, the > >>tabs across > >>the top of the Settings window is blank; there are no names > >>on the tabs. > >>However, except for the TX tab, they all do respond properly > >>with the > >>expected options.when they are selected. In the case of > the TX tab, > >>some options seem to be absent. The "TX frequency, "" Net" and "CW > >>control" options are visible, but there is no "TX keying" option as > >>described in the manual. As a consequence, I'm unable to > >>select a COM > >>port for my interface. I've reread the manual and the Help files > >>several times without success. Does anyone have any insight here? > >> > >>Thanks and 73 de Joe > >> > >>_______________________________________________ > >>Dx4win mailing list > >>[email protected] > http://mailman.qth.net/mailman/listinfo/dx4win > >> > >> > >> > > > > > > > > > > > > > --- StripMime Report -- processed MIME parts --- multipart/alternative > text/plain (text body -- kept) > text/html > The reason this message is shown is because the post was in > HTML or had an attachment. Attachments are not allowed. To > learn how to post in Plain-Text go to: > http://www.expita.com/nomime.html --- > _______________________________________________ > Dx4win mailing list > [email protected] http://mailman.qth.net/mailman/listinfo/dx4win >
