Tnx, Mel. At least you saved me from wasting more time. 73, Joe
Mel wrote: >No it's changed... The options under TX are checkboxes for Net and Use >CW Control > >6.02 doesn't allow a separate COM port for PSK31 PTT control... It uses >the CW PTT. This suits me just fine, but apparently it creates problems >for others... > > > >>-----Original Message----- >>From: [EMAIL PROTECTED] >>[mailto:[EMAIL PROTECTED] On Behalf Of Joe Giacobello >>Sent: January 16, 2004 14:44 >>To: Mel >>Cc: DX4WIN >>Subject: Re: [Dx4win] PSK31 Menu Problem >> >> >>Mel, thanks for your help, and you were partially correct. >>By reducing >>the font size from 9 to 6, I was able to have the tab headings show >>their proper labels. However, I still don't get the options that the >>manual says I should. The manual says than under "TX" I should get a >>the options for "NET" and "TX Keying". "TX Keying" then should have >>check boxes in a submenu for "VOX," "CW Interface" and >>"Serial Ports 1 >>thru 8". I get no "TX Keying" option at all! I get instead a check >>box for "Use CW Control". Something is haywire here, because I can't >>select the COM port for my interface. >> >>I should add that I am using version 6.02 and my manual is >>for 6.0. I >>am not aware of any updates for the manual. >> >>Thanks again. >> >>73, Joe >> >>Mel wrote: >> >> >> >>>Check the font selections in screen preferences... >>> >>> >>> >>> >>> >>>>-----Original Message----- >>>>From: [EMAIL PROTECTED] >>>>[mailto:[EMAIL PROTECTED] On Behalf Of Joe Giacobello >>>>Sent: January 15, 2004 17:06 >>>>To: DX4WIN >>>>Subject: [Dx4win] PSK31 Menu Problem >>>> >>>> >>>>I have a very mysterious problem when I try to adjust the TX >>>>(transmit >>>>parameters) settings in the PSK31 window. First of all, the >>>>tabs across >>>>the top of the Settings window is blank; there are no names >>>>on the tabs. >>>>However, except for the TX tab, they all do respond properly >>>>with the >>>>expected options.when they are selected. In the case of >>>> >>>> >>the TX tab, >> >> >>>>some options seem to be absent. The "TX frequency, "" Net" and "CW >>>>control" options are visible, but there is no "TX keying" option as >>>>described in the manual. As a consequence, I'm unable to >>>>select a COM >>>>port for my interface. I've reread the manual and the Help files >>>>several times without success. Does anyone have any insight here? >>>> >>>>Thanks and 73 de Joe >>>> >>>>_______________________________________________ >>>>Dx4win mailing list >>>>[email protected] >>>> >>>> >>http://mailman.qth.net/mailman/listinfo/dx4win >> >> >>>> >>>> >>>> >>>> >>> >>> >>> >>> >>> >>--- StripMime Report -- processed MIME parts --- multipart/alternative >> text/plain (text body -- kept) >> text/html >>The reason this message is shown is because the post was in >>HTML or had an attachment. Attachments are not allowed. To >>learn how to post in Plain-Text go to: >>http://www.expita.com/nomime.html --- >>_______________________________________________ >>Dx4win mailing list >>[email protected] http://mailman.qth.net/mailman/listinfo/dx4win >> >> >> > >_______________________________________________ >Dx4win mailing list >[email protected] >http://mailman.qth.net/mailman/listinfo/dx4win > > > > --- StripMime Report -- processed MIME parts --- multipart/alternative text/plain (text body -- kept) text/html The reason this message is shown is because the post was in HTML or had an attachment. Attachments are not allowed. To learn how to post in Plain-Text go to: http://www.expita.com/nomime.html ---
